advertisement
Example: Programming department 2 as taxable 1, SICS, negative department, entry digit limit - 7 digits, and allowing open & preset entry. (ABCDEFGH: 00011173)
Key operation example Print
00011173 @
" A
From left, EGH
Tax status Sign(F)
Preset unit price
To program zero
Unit price
(max. six digits)
*
D
Dept. key
A
*To program departments 17 through 32, press the department shift key at this point.
For department 33-99:
Dept. code d
To program zero
Unit price
(max. six digits) s A
To program another department, start from the beginning without pressing the A key.
Print Key operation example
1000 !
A
Unit price
Even if a department is not programmed to allow the entry of preset unit prices in functional programming, the department is automatically changed to allow the entry of preset unit prices by this programming entry.
2
PLU (Price Look-Up) and Subdepartment Programming
The PLU function allows speedy key entries whereby a price is automatically called up when a code is entered.
The subdepartment is a kind of “open PLU”, which requires you to enter a price after the PLU code is entered. A maximum of 1200 PLU/subdepartment settings are possible. Each one belongs to a department and acquires the department’s parameters (tax status, SICS and sign).
The cash register is preprogrammed so all 1200 codes are assigned as PLUs associated with department 1 and preset unit price “0”.
33
34
Unit price and associated department assignment
*
2
PLU code p
To program zero
* 3
Unit price
(max. six digits)
* 1
D
Associated
Dept. key
A
*1: To assign departments 17 through 32, press the department shift key at this point.
When the associated department is department 33-99:
To program zero
* 2 PLU code p Associated dept. code
(1 to 99) d * 3 Unit price
(max. six digits) s A
*2: 1 through 1200 (Depending on the EJ memory size setting, up to 200)
*3: For a subdepartment, set the limit amount of unit price entry.
To program the following PLU, start from entering a unit price or an associated department code without pressing the A key.
To program another PLU, start from the beginning without pressing the A key.
Key operation example
1 p
125 #
A
Unit price
Associated dept.
PLU code
To delete a PLU code, use the following sequence:
PLU code p v
To delete the following PLU
A
To delete another PLU
PLU/subdepartment selection
* 1 PLU code p
To program "0"
* 2 A s
To program the following PLU
To program another PLU
*1: 1 through 1200 (Depending on the EJ memory size setting, up to 200)
*2: 0 for subdepartment or 1 for PLU (default: 1)
Print Key operation example
1 p
0 s A
A
PLU/subdept.
When you program the last PLU code, the programming sequence will be complete with a press of the s key.
advertisement