TELETEXT Operation. Lenco DVT-154

Scan Type

Press and then use / to select one of the search type options: Auto Scan/ Manual Scan/ Scan By NIT.

Channel

Enter the number directly to select the channel number, but the range of channel is 1 --- 69.

Frequency KHz

This function shows you the frequency of the channel.

Bandwidth

Press and then use / to select one of the band width options: 7M/ 8M.

Encrypted Progr.

Press and then use / to select one of the encrypted service options: Save/ Not Save.

Scan Mode

Press and then use / to select one of the update mode options: Append/ Replace.

Start Scan

Press ENTER to start scan.

Sort Channels

-Use / to select the Sort Channel item and then press ENTER to confirm it

Name Upward

Press ENTER to go up in the channel list by name.

Name Downward

Press ENTER to go down in the channel list by name.

Encrypt

Press ENTER to sort the channel list by encrypting.

3. This function shows you the detailed information of the channel, that can predict the time of the program playing.

4. You can book the channel by pressing ENTER, the operation of it is the same as Book setting.

TTX

Press this button to enter theTeletext signal. Press it again the background of teletext will become transparent and press it once more to exit teletext mode and return to normal TV viewing.

RED/ GREEN/ YELLOW/ BLUE

Press these buttons to access directly to the corresponding color pages displayed at the lower parts of the teletext screen.

PAGE SELECTION

Press UP and Down buttons to select the preceding or following page.

You can also enter the page number (three digital) directly using the number buttons to select the page, and if you press a wrong

number during input, you must complete the three digital number and re-enter the correct page number.

Press Right and Left buttons to select the sub page of one page.

1. Press the DVD/DVB setup button on the remote control to bring up the main menu on the screen and use / to select

the EPG menu.

2. Press the ENTER to confirm your selection and there will be a EPG menu on the screen as shown below.

21 22

1. Turn ON and OFF the DVD function

- Turn on the LCD TV and then press the source button repeatedly to select DVD mode.

2. Inserting a disc

- Insert the Disc into the Disc slot (Data side of the disc has to face towards the front of the unit), the player will load the disc automatically. There will be an on screen indication “ CLOSE ” then “ READ ”.

After loading

the disc content, it will switch to play mode automatically. If the disc is already placed inside, the disc will be

read automatically.

NOTE: - For some discs, after loading the content of the disc, you need to press or select it from the disc menu

to start.

- Please make sure when inserting the Disc, the Data side of the disc should be facing you, When inserting

the Disc incorrectly, you may damage the DVD mechanism.

3. Play the DVD

- The disc menu will display the content you are able to select. When playing the disc, you may use the button

to toggle between Play and Pause mode. This product also supports Menu, Title, Sequential

and Program playback.

4. Menu playback (for DVD/ super VCD and VCD 2.0 discs)

- Press the MENU/FAV button

For DVD discs, the screen will display the DVD Disc Menu (Root Menu)

For Super VCD & VCD2.0 discs, the screen will display the Super VCD, VCD2.0 Disc Menu (PBC: [OFF])

(Press the D.MENU button to display the PBC status).

Playback the Super VCD & VCD2.0 discs, the default PBC status is ON.

- For DVD discs, use the navigation buttons to select and Play the highlighted contents; For Super

VCD & VCD2.0 discs, use the numeric buttons to play your favorite content directly.

- Press the ENTER or button to start from the highlighted content.

- Return to the Root Menu when playing the disc

For DVD discs, press the MENU/FAV button to display the Disc Menu.

For Super VCD & VCD2.0 discs, when PBC is ON, press D.MENU to display the Disc Menu.

- STOP

Press button once to stop. Press button to resume from where you stopped.

Press button Twice to stop. Press button to start from beginning.

In order to protect the disc, press button then press EJECT button to take the disc out. When the disc is ejected, hold the disc edges lightly and take it from the eject direction to prevent scratches.

When not using the DVD function (in stand-by mode or using others modes for a long time), please take out the disc to protect the DVD loader and the disc.

5. Title playback (for DVD discs only)

- Press the TITLE button, there will be an on screen indication “ TITLE ” .

- Press the direction or numeric buttons to select your favorite title.

- Playing will start from the first chapter of the selected title.

24