3.1.1 Edit. UTStarcom F1000 Vonage, F1000 Series

Add to My manuals
79 Pages

advertisement

3.1.1 Edit. UTStarcom F1000 Vonage, F1000 Series | Manualzz

Phonebook (Names)

2. The letter/digit just entered will be underlined. After you have entered the intended letter/digit, press the appropriate number key to input the next letter/digit. If the next letter/digit and current letter/digit share the same key, wait for one second to input the letter/digit again.

To delete the last entered letter/digit, press the right soft key

( Clear ); to delete all letters/digits, press and hold the right soft key

( Clear ).

When a matched name is highlighted, you can press to call the corresponding phone number

When an entry (name) is highlighted, press the left soft key

( Details ) to see the detailed information: name, phone number and group category. Press to browse through the text

When the entry details are displayed, you can press to call the phone number.

When the entry details are displayed, you can press the left soft key

( Option ) to select from the following options:

3.1.1 Edit

Change names, numbers and group categories by following the screen prompts.

3.1.2 Delete Entry

After this option is selected, “ Delete?

” will be displayed. Press the left soft key ( Ok ) to confirm the deletion.

3.2 Add Entry

Add Entry

Select this option to add new entries into the phonebook.

29

Phonebook (Names)

1. Key in the name, and press the left soft key ( Ok ).

You can enter a maximum of 20 English letters or 10 Chinese characters (refer to “Input Method” on page 68).

2. Enter the phone number (24 digits maximum), and press the left soft key ( Ok ).

The phone number cannot be left blank; otherwise Number Error will be displayed.

3. Press to highlight the desired group category: Family , Friend ,

Colleague , Classmate , VIP , Partner , Others or Blacklist .

Press the left soft key ( Ok ) to complete the operation.

If the name is not filled in, the phone will use the first 12 digits from the phone number as the name

The phone number and name of the newly added record cannot be identical to those of an existing record. Otherwise, the text Exists will be displayed after you enter the phone number and press the left soft key ( Ok )

The phone will automatically reject any incoming caller whose number is on the Blacklist . No response will be displayed

No more entries can be added if the phonebook memory is full. When

Add Entry is selected, the phone will remind you that the phonebook memory is full

In standby mode, you can add a new entry by entering the phone number and pressing the left soft key ( Save ). Then, enter the name and press the left soft key ( Ok ); press to highlight the desired group category and press the left soft key ( Ok ) to complete the operation

30

advertisement

Related manuals