advertisement
Menu -> WiFi-Settings
Ensure that the WPA-PSK key consists of 8-63 ASCII characters or 64 hexadecimal characters
Activate
Select this option to connect to the AP according to the AP profile setting.
If the connection fails, the phone will try to connect to other AP profiles’
APs. If the phone fails to connect to all these APs and the Auto Scan function is active, the phone will try to search and connect to another available open AP. (Refer to “Auto Scan” on page 58)
4.5.2.2 Auto Scan
WiFi-Settings WiFi Config Auto Scan
If the Auto Scan function is active, when the phone is switched on and fails to connect to the APs specified in “AP Profile”, the phone will do a scan for available APs and try to connect to one open AP of these scanned APs.
After accessing this option, select Enable or Disable to activate or deactivate the Auto Scan function.
Note: If the phone fails to connect to all the specified and scanned
APs, the phone will periodically retry AP connections.
If the phone fails to register with the Vonage network after the AP connection, the phone will prompt you to try another AP.
4.5.3 Web Configuration
A PC browser can be used as an alternative to configuring AP profile and network information via the handset. Ensure that the PC is connected to the same AP as the phone.
1. Enter the phone's IP address in the address bar of the PC's web browser and press <Enter>.
58
Menu -> WiFi-Settings
2. Follow screen prompts to enter the user name (“user”) and password
(the phone’s security code), and then click <OK>.
The WiFi Web Server Management window will be displayed:
59
Menu -> WiFi-Settings
3. Click , and then you can select:
- Local Network Config : To view the phone’s network status and perform network configuration
60
Menu -> WiFi-Settings
- Wireless AP Config: To configure the phone’s AP profiles
61
Menu -> WiFi-Settings
- Generic Information: To view the phone’s generic information
62
advertisement