advertisement
Menu -> Settings
4.3.5.4 On/Off Animation
Settings Display On/Off Animation
This option enables you to select the power-on/off animation. When this option is highlighted, its current setting will be displayed in the adjacent bubble.
Select one of the options Animation 1 - Animation 4 ; the corresponding animation will be displayed. Press the left soft key ( Ok ) to complete the operation.
4.3.6 Set Security
Settings Set Security
This password protected option enables you to set the security level to protect your phone from unauthorized use.
After accessing this option, you will be prompted to enter the user definable security code (i.e. password). Key in the security code and press the left soft key ( Ok ). If correct, the following options will be available (otherwise Code Error will be displayed):
Note: The initial default security code is “888888”.
4.3.6.1 PowerOn Code
If this function is active, the security code will need to be entered each time you switch on the phone. When this option is highlighted, its current setting will be displayed in the adjacent bubble.
After accessing this option, select On or Off to activate or deactivate.
4.3.6.2 Change Code
Select this option to change the security code. Observe the following steps:
47
Menu -> Settings
1. When New Code is displayed, enter a new security code (0-6 digits long, using numbers 0-9), and then press the left soft key ( Ok ).
Confirm Code will be displayed.
2. Enter the new security code again and press the left soft key ( Ok ) to complete the operation.
The security code is “888888” by default
If the new security code entered in step 2 is different from that entered in step 1, when you press the left soft key ( Ok ), Not Matched will be displayed
To avoid any inconvenience, please remember the new security code
4.3.6.3 User Reset
Select this option to restore your phone’s default settings.
When you access this option, “ Reset All?” will be displayed. Press the left soft key ( Ok ) to complete the operation.
This operation will not delete the phonebook entries or call logs. It cannot change the phone’s date and time either.
Phone Default Settings
Functions Default Settings
Profiles Standard
Listening Volume
Call Log (Duration)
Speed Dial Setting
3
0:00:00
No
Phonebook Group (Ring Tone)
Security Code
PowerOn Code
Ring 5
888888
Off
48
Menu -> Settings
Functions
Scheme (Static Picture)
Default Settings
Photograph1
Scheme (User-defined)
Answer Mode
(Blank)
Talk Key
Language English
Contrast 3
Screen Saver
On/Off Animation
Digital Mode
Animation 3
Input Method (PinYin, Sim Stroke) Off (Deactivated)
Input Method (English, Letter) On (Activated)
Alarm (On/Off)
Alarm (Set Time)
Off
08:00
Alarm (Snooze)
Time Format
Off
24 Hour
Profiles Default Settings
Profile
Options
Standard Meeting Outdoor
User
Define
Ring Volume High Low High High
Ring Mode
Ring Tone
Ringing Vibration Ringing Ringing
Ring 6 Ring 6 Ring 6 Ring 6
Alarm Tone Ring 3 Ring 3 Ring 3 Ring 3
Keypad Tone Off Off Off Off
Alert Tone On Off On On
49
advertisement
Related manuals
advertisement
Table of contents
- 28 2.6.7 Caller ID Block
- 29 2.6.8 Repeat Dial on Busy
- 29 2.6.9 Mute the Microphone Volume
- 29 2.6.10 Access the Phonebook
- 30 2.6.11 Adjust the Listening Volume
- 33 3. PHONEBOOK (NAMES)
- 34 3.1.1 Edit
- 34 3.1.2 Delete Entry
- 36 3.3.1 One by One
- 36 3.3.2 All
- 37 3.4.1 Ring Tone
- 37 3.4.2 Browse
- 39 4. MENU
- 39 4.1.1 Missed Log
- 41 4.1.2 Received Log
- 42 4.1.3 Dialed log
- 43 4.1.4 Delete Log
- 43 4.1.5 Duration
- 44 4.2.1 Standard
- 46 4.2.2 Meeting
- 46 4.2.3 Outdoor
- 46 4.2.4 User Define
- 47 4.3.1 Scheme
- 49 4.3.2 Date/Time
- 49 4.3.3 Answer Mode
- 50 4.3.4 Language
- 50 4.3.5 Display
- 52 4.3.6 Set Security
- 55 4.3.7 Input Method
- 56 4.4.1 Calculator
- 57 4.4.2 Calendar
- 57 4.4.3 Alarm
- 58 4.4.4 Time Zone
- 59 4.4.5 DST Setting
- 59 4.4.6 Time Format
- 60 4.5.1 Net Search
- 61 4.5.2 WiFi Config
- 63 4.5.3 Web Configuration
- 68 4.5.4 Network Parameter
- 71 4.6 MISC
- 71 4.6.1 Vendor Information
- 71 4.6.2 PC Config
- 71 4.6.3 Local TFTP Update
- 72 4.6.4 Local Log
- 72 4.6.5 Factory Reset
- 73 5. INPUT METHOD