Installation. Aastra OpenCom 510

Installation

4.

Installation

Safety Precautions

4.1

Safety Precautions

The CE symbol on the product confirms that it meets the requirements of the technical guidelines on user safety and electromagnetic compatibility valid at the time of approval.

4.1.1 General Instructions

Please note: This product may be installed and serviced by qualified personnel only. Opening the housing and carrying out unauthorised repairs may damage the product and will invalidate the warranty.

DANGER!

Hazardous voltages inside the device!

The MPS+1-AC power supply unit may not be opened as this may lead to exposure to hazardous voltage!

Defective power supply units must be sent to the manufacturer for repairs.

Always use the original packaging when packing OpenCom 510 components for transport or storage.

CAUTIONT!

Static charge can damage the OpenCom 510. Before and during work on the electrical components of the OpenCom 510, discharge any static electricity from your body and the tools you are using.

21