Installation. Aastra OpenCom 510

Below you will find brief information for OpenCom 510, OpenCom 107, OpenCom 130, OpenCom 131 and OpenCom 150: The OpenCom 510 is a communication system designed for integrated voice and data communication. It features a modular build for installation into a 19" frame. Supporting telephony with systems phones, ISDN terminals, and analogue terminals. It is designed to be connected to an ISDN basic access interface using the DSS1 protoco. It can be integrated into system environments with structured cabling.

PDF

Document

Key features

Modular design for flexible configuration
Supports system, ISDN, and analog terminals
Integrates voice and data communication
Can be cascaded and networked for expansion
Web-based configuration and programming
Supports VoIP telephony

Frequently asked questions

The OpenCom 510 supports Euro ISDN terminals, DeTeWe system telephones, OpenPhone 52 ISDN telephones(to the Upn port), DeTeWe RFP 22 base stations ,analogue terminals.

The OpenCom 510 can be configured and programmed by means of a web browser(web console). This browser needs to be installed on a PC which is connected to the system.

The system PIN, which is used for remote-programmable call forwarding is “0000”.