60
K-r_OPM_ENG.book Page 60 Thursday, September 30, 2010 2:57 PM
Initial Settings
2
The first time the camera is turned on after purchasing, the [Language/ u ] screen appears on the monitor. Follow the procedure below to set the language displayed on the monitor and the current date and time. Once these settings are made, you will not need to set them again next time you turn on your camera.
If the [Date Adjustment] screen appears, set the date and time by following the procedure
in “Setting the Date and Time” (p.64).
MENU Cancel OK OK
Date Adjustment
Date Format
Date
Time
01 / 01 / 2010
24h
Settings complete
MENU Cancel
Setting the Display Language
You can choose the language in which the menus, error messages, etc. are displayed from the following: English, French, German, Spanish,
Portuguese, Italian, Dutch, Danish, Swedish, Finnish, Polish, Czech,
Hungarian, Turkish, Greek, Russian, Korean, Traditional Chinese,
Simplified Chinese and Japanese.
1
Use the four-way controller
( 2345 ) to select the desired language.
MENU Cancel OK OK
K-r_OPM_ENG.book Page 61 Thursday, September 30, 2010 2:57 PM
2
Press the 4 button.
The [Initial Setting] screen appears in the selected language.
Press the four-way controller ( 3 ) twice
and proceed to Step 10 on p.62 if
W (Hometown) does not have to be changed.
3
Press the four-way controller ( 3 ).
The cursor moves to W .
4
Press the four-way controller ( 5 ).
The [ W Hometown] screen appears.
5
Use the four-way controller
( 45 ) to select a city.
Initial Setting
English
New York
Text Size Standard
Settings complete
MENU Cancel
Hometown
61
2
New York
DST
MENU Cancel
6
Press the four-way controller ( 3 ).
The cursor moves to [DST] (daylight saving time).
7
Use the four-way controller ( 45 ) to select O or P .
8
Press the 4 button.
The camera returns to the [Initial Setting] screen.
9
Press the four-way controller ( 3 ).
The cursor moves to [Text Size].
OK OK
K-r_OPM_ENG.book Page 62 Thursday, September 30, 2010 2:57 PM
62
2
10
Press the four-way controller ( 5 ) and use the four-way controller
( 23 ) to select [Standard] or
[Large].
Selecting [Large] increases the text size of the selected menu items.
Initial Setting
English
New York
Text Size Standard
Large
Settings complete
MENU Cancel OK OK
11
Press the 4 button.
12
Press the four-way controller ( 3 ) to select [Settings complete].
Initial Setting
English
New York
Text Size Standard
Settings complete
MENU Cancel OK OK
13
Press the 4 button.
The [Date Adjustment] screen appears.
In this manual, the menu screens hereafter are described with [Text Size] set to [Standard].
K-r_OPM_ENG.book Page 63 Thursday, September 30, 2010 2:57 PM
When the Wrong Language is Set
If you mistakenly select the wrong language in the [Language/ u ] screen and proceed to the [Date Adjustment] screen, you can perform the following operation to set the language back.
If you have proceeded to switch the camera to Capture mode (and the camera is ready to take a picture), perform the following operation from
Step 2 to set the language back.
1
Press the 3 button once to display the guides on the monitor.
P ࡊࡠࠣࡓ⥄േ㔺
The screen shown on the right is an example of the guides displayed. The displayed screen will vary depending on the selected language.
P
The guides appear on the monitor for 3 seconds.
2
Press the 3 button once.
2010/01/01 00:00
[ A 1] is displayed in the upper tab.
H is displayed when the mode dial is set to H .
3
Press the four-way controller ( 5 ) five times.
[ R 1] is displayed in the upper tab.
Press the four-way controller ( 5 ) six times when the mode dial is set to
H .
4
Press the four-way controller ( 3 ) to select [Language/ u ].
5
Press the four-way controller ( 5 ).
The [Language/ u ] screen appears.
6
Use the four-way controller ( 2345 ) to select the desired language and press the 4 button.
The [ R Set-up 1] menu in the selected language appears.
Refer to the following pages and set the desired city for [Hometown] and the current date and time as necessary.
• To change the hometown: “Setting the World Time” (p.270)
• To change the date and time: “Changing the Date and Time Display”
(p.270)
• When the hometown and the date and time are not set, the [Initial Setting] screen or [Date Adjustment] screen will be displayed again next time the camera is turned on.
• If you have not proceeded to the [Date Adjustment] screen, you can reselect a language using the four-way controller ( 5 ) in the [Language/ u ] screen.
2
63
