222
K-r_OPM_ENG.book Page 222 Thursday, September 30, 2010 2:57 PM
Setting the Playback Display Method
7
You can set the initial magnification when enlarging images, whether to display the Bright/Dark Area warning, and whether to automatically rotate images that are shot with the camera held vertically in Playback mode.
1
Select [Quick Zoom] in the [ Q Playback 1] menu and press the four-way controller ( 5 ).
2
Use the four-way controller ( 23 ) to select the magnification and press the 4 button.
Select from [Off] (default setting), [×2],
[×4], [×8] or [×16].
1
Slideshow
Quick Zoom
Bright/Dark Area
Auto Image Rotation
IrSimple
Delete All Images
O f f
X2
X4
X8
X16
MENU Cancel OK OK
3
Use the four-way controller ( 23 ) to select [Bright/Dark Area], and use the four-way controller ( 45 ) to select O or P .
1
Slideshow
Quick Zoom
Bright/Dark Area
Auto Image Rotation
IrSimple
Delete All Images
O f f
MENU Exit
4
Use the four-way controller ( 23 ) to select [Auto Image
Rotation], and use the four-way controller ( 45 ) to select
O or P .
O
During playback, the image is automatically rotated based on the
rotation information when [18. Saving Rotation Info] in the [
A Custom
Setting 3] menu (p.90) is set to [On]. (default setting)
P The image is not automatically rotated during playback.
5
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
