K-r_OPM_ENG.book Page 324 Thursday, September 30, 2010 2:57 PM
324
Camera Case/Strap
Camera Case O-CC84
Camera Strap O-ST53 (*)
Hand Strap O-ST991
Hand Strap O-ST992
Free Length Strap O-ST842
Imagesensor Cleaning Kit O-ICK1
Use this kit to clean the optical parts such as the CMOS sensor and lens of this camera.
Others
Body Mount Cap K
Hot Shoe Cover F
K
(*)
USB Cable I-USB7 (*)
AV Cable I-AVC7
11
K-r_OPM_ENG.book Page 325 Thursday, September 30, 2010 2:57 PM
Error Messages
325
Error Message
Memory card full
No image
This image cannot be displayed
No card in the camera
Cannot use this card
Memory card error
Card is not formatted
Card is locked
The card is electronically locked
This image cannot be enlarged
This image is protected
Description
The SD Memory Card is full and no more images can be saved. Insert a new SD Memory
Card or delete unwanted images. (p.52, p.84)
Data may be saved when you perform the following operations.
• Change the file format to JPEG. (p.195)
• Change the JPEG Recorded Pixels or JPEG
Quality setting. (p.192, p.193)
There are no images that can be played back on the SD Memory Card.
You are trying to play back an image in a format not supported by this camera. You may be able to play it back on another brand of camera or your computer.
The SD Memory Card is not inserted in the
camera. (p.52)
The inserted SD Memory Card is not compatible with this camera.
The SD Memory Card has a problem, and image capture and playback are impossible. It may be viewable on a computer but not with this camera.
The SD Memory Card you have inserted is unformatted or has been formatted on another device and is not compatible with this camera.
Use the card after formatting it with this camera.
(p.268)
The write-protect switch on an SD Memory
Card you have inserted is locked. Unlock the
SD Memory Card. (p.53)
Data is protected by the SD Memory Card security feature.
You are trying to enlarge an image that cannot be enlarged.
You are trying to delete an image that is protected. Remove protection from the image.
(p.240)
11
326
K-r_OPM_ENG.book Page 326 Thursday, September 30, 2010 2:57 PM
11
Error Message
Battery depleted
Not enough battery power remaining to clean sensor
Not enough battery power remaining to activate Pixel Mapping
Image folder cannot be created
Unable to store image
Settings not stored
The operation could not be completed correctly
No more images can be selected
No image can be processed
This image cannot be processed
The camera failed to create an image
Description
The battery is exhausted. Install a fully charged battery or new AA batteries in the camera.
(p.43)
Appears during sensor cleaning if the battery level is insufficient. Install a fully charged battery or new AA batteries, or use the AC
adaptor kit K-AC109 (optional). (p.50)
Appears during Pixel Mapping if the battery level is insufficient. Install a fully charged battery or new AA batteries, or use the AC
adaptor kit K-AC109 (optional). (p.50)
The maximum folder number (999) and file number (9999) are being used, and no more images can be saved. Insert a new SD Memory
Card or format the card. (p.268)
The image could not be saved because of an
SD Memory Card error.
The DPOF settings could not be saved because
SD Memory Card is full. Delete unwanted
images and perform DPOF setting again. (p.84)
The camera was unable to measure the manual white balance or detect dust on the sensor. Try
the operation again. (p.202, p.316)
You cannot select 100 or more images at a time
for Index (p.229) and Select & Delete (p.236).
There are no images that can be processed
using Digital Filter (p.253) or RAW
Development (p.259) function.
Appears when you try to perform Resize
(p.250), Cropping (p.251), Digital Filter (p.253),
or RAW Development (p.259) for images
captured with other cameras, or when you try to perform Resize or Cropping for minimum file size images.
The creation of an index print image failed.
(p.229)
