K-r_OPM_ENG.book Page 287 Thursday, September 30, 2010 2:57 PM
Correcting Defective Pixels in the
CMOS Sensor (Pixel Mapping)
Pixel Mapping is a function for mapping out and correcting defective pixels in the CMOS sensor.
1
Select [Pixel Mapping] in the [ R Set-up 4] menu and press the four-way controller ( 5 ).
The [Pixel Mapping] screen appears.
2
Press the four-way controller ( 2 ) to select [Pixel Mapping] and press the 4 button.
Defective pixels are mapped and corrected, and the screen that was displayed before selecting the menu appears again.
Pixel Mapping
Checks the image sensor and corrects defective pixels
Pixel Mapping
Cancel
OK OK
When the battery level is low, [Not enough battery power remaining to activate
Pixel Mapping] is displayed on the monitor. Use the AC adapter kit K-AC109
(optional) or change to the battery with ample power remaining.
287
9
