AppRadio Mode. Pioneer AVIC-5201NEX

AppRadio Mode

46

AppRadio Mode

Displays the launcher application screen.

Displays the previous screen.

Displays the current source.

Displays the menu screen.

p Press the button twice to hide the App control side bar.

Press the button twice again to display it again.

p and device.

are not available depending on the type of

WARNING

Certain uses of an iPhone or a smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions.

If in doubt as to a particular function, only perform it while the car is parked.

No feature should be used unless it is safe to do so under the driving conditions you are experiencing.

AppRadio Mode Compatibility

p AppRadio Mode is only available on an iPhone.

iPhone models

 iPhone 6, iPhone 6 Plus, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, and iPhone 4

 iPod touch (4th and 5th generation)

Smartphone (Android) models

 For details about Android device compatibility with this product, refer to the information on our website.

Using AppRadio Mode

You can control applications for an iPhone or a smartphone directly from the screen ( AppRadio Mode ).

In AppRadio Mode , you can operate applications with finger gestures such as tapping, dragging, scrolling or flicking on the screen of this product.

Important

 To use AppRadio Mode , install the AppRadio app on the iPhone or smartphone in advance. For details about the

AppRadio app, visit the following site:

For U.S.A.

http://www.pioneerelectronics.com/AppRadioMode

For Canada http://www.pioneerelectronics.ca/AppRadioMode

 Be sure to read Using app-based connected content before you perform this operation.

 Refer to Using app-based connected content

on page 84

 Content and functionality of compatible applications are the responsibility of the App providers.

 In AppRadio Mode , usage is limited while driving, with availability of functions and content determined by the

App providers.

 AppRadio Mode allows access to applications other than those listed, subject to limitations while driving.

 PIONEER IS NOT RESPONSIBLE AND DISCLAIMS

LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS

AND CONTENT, INCLUDING WITHOUT LIMITATION ANY

INACCURACIES OR INCOMPLETE INFORMATION.

p In this chapter, iPhone and iPod touch will be referred to as

“iPhone”.

p The compatible finger gestures vary depending on the application for an iPhone or a smartphone.

p Even though an application is not compatible with

AppRadio Mode , depending on the application an image may be displayed. But you can not operate the application.

Starting procedure

When connecting an iPhone or a smartphone to this product, select the method for connecting your device. Settings are required according to the connected device.

 Refer to Setup for iPod / iPhone or smartphone

on page 33

p Touch the desired application icon after the AppRadio app is launched.

After the desired application is launched, the application operation screen appears.

p If you connect your device while an AppRadio Mode compatible application is already running, the application operation screen will appear on this product.

p Press the button to go back to the top menu screen.

For iPhone users

p When you use an iPhone with a Lightning connector, connect the iPhone to this product via Bluetooth wireless technology and unlock the iPhone in advance.

 Refer to Registering your Bluetooth devices

on page 30

1 Connect your iPhone.

 Refer to the Installation Manual.

2 Press the button.

3 Touch [ APPS ].

p When you use an iPhone with a 30-pin connector, messages appear on the screen of this product and your iPhone.

Proceed to the next step.

p When you use an iPhone with a Lightning connector, the

AppRadio app is launched, and the AppRadio Mode screen (Application menu screen) appears after this step. In such a case, the following steps are not required.

4 Use your iPhone to launch the application.

The AppRadio app is launched.

5 Touch [ OK ] on the screen of this product.

The AppRadio Mode screen (Application menu screen) appears.

Using the keyboard (for iPhone users)

When you tap the text input area of an application for iPhone, a keyboard will be displayed on the screen. You can input the desired text directly from this product.

p This function may not be available depending on your iPhone.

p This function is only available in AppRadio Mode on the iPhone.

CAUTION

For your safety, the keyboard functionality is only available when the vehicle is stopped and the parking brake is engaged.

< CRB5005-B >