Starting procedure (for camera). Pioneer AVIC-5201NEX

MIXTRAX

AV input

6 Touch [ AV ].

Starting procedure (for camera)

You can display the image output by the camera connected to video input.

 Refer to the Installation Manual.

1 Display the “ System ” setting screen.

3 Touch [ AV ].

4 Touch the item.

The following items are available:

Auto , PAL , NTSC , PAL-M , PAL-N , SECAM .

2 Touch [ Input/Output Settings ].

3 Touch [ AV Input ].

4 Touch [ Camera ].

5 Display the AV source selection screen.

6 Touch [ Camera View ].

p When the camera view of both the rear view camera and 2nd camera are available, the key to switch the display appears.

Touch this key to switch the display between the rear view image and 2nd camera image.

Setting the video signal

When you connect this product to an AV equipment, select the suitable video signal setting.

The default setting is “ Auto ”.

p You can operate this function only for the video signal input into the AV input.

1 Display the “ Video Setup ” screen.

56

2 Touch [ Video Signal Setting ].

< CRB5005-B >

MIXTRAX

Exits the MIXTRAX screen.

Displays the LinkGate screen.

Touch the desired item. Songs related to the selected item are played.

Selects a track.

Turns on or off the MIXTRAX original visual display.

Switches between playback and pause.

Displays the item selected on the

LinkGate screen or item selection screen.