Playing Back Movies. Canon DC100, DC 100, DC95

Playback

Playing Back Movies

26

To change the operating mode, refer to About the Operating Modes ( 9).

The scene index screen appears with the selection frame on the first scene.

1. Move ( , ) the selection frame to the scene you want to play back.

Press + or – to move to the next or previous index page.

2. Press / to begin the playback.

• Playback of the scenes recorded on the disc will start from the scene selected.

• When the end of the last movie recorded is reached, playback will stop and the camcorder will return to the scene index screen.

During Playback:

3. Press / again to pause the playback.

4. Press to stop the playback and return to the scene index screen.

 To use the viewfinder, close the LCD panel.

 About the screen display: During playback, the recording’s time code will be displayed at the upper right corner of the screen in hours : minutes : seconds.

You can also choose to display instead the date and time when the scene was recorded and additional recording data ( 30).

 As long as you don’t turn off the camcorder you can resume playback from the point you stopped last.

Special Playback Modes

Fast Forward Playback /

Fast Reverse Playback

During normal playback, press or

Repeatedly press the button to increase the

. playback speed.

Fast forward: 1.5x

→

5x

→

15x

→

25x the normal speed.

Fast reverse: 2.5x → 5x → 15x → 25x the normal speed.

Playback Pause

During normal playback, press / .