Manually Adjusting the Focus. Canon DC100, DC 100, DC95

42

Manually Adjusting the Focus

Autofocus may not work well on the following subjects. In such case, focus manually.

Reflective surfaces

Subjects with low contrast or without vertical lines

Fast Moving

Subjects

Through dirty or wet windows

Night Scenes

* only. To change the operating mode, refer to About the Operating Modes (

9).

Mode switch:

1. Adjust the zoom.

FOCUS

“MF” appears.

3. Adjust ( ) the focus as required until the image appears focused.

Pressing FOCUS ( ) again will return to autofocus.

 The camcorder will automatically return to autofocus when you set the mode switch to .

 Readjust the focus when you have turned off the camcorder.

Infinity Focus

Use this function when you wish to focus on faraway subjects such as mountains or fireworks.

1. Adjust the zoom.

2. Keep

FOCUS

( ) pressed down for more than 2 seconds.

• “ ” appears.

• Pressing FOCUS ( ) again will return to autofocus.

If you operate the zoom or the multi selector ( ) during infinity focus, “ ” changes to “MF” and the camcorder returns to manual focusing mode.