Connecting the Speakers (FWD-55B2/ 46B2/42B2). Sony FWD-32B1, FWD-46B2, FWD-42B2, FWD32B1DS, FWD-55B2

Connections

Before you start

• First make sure that the power of each piece of equipment is turned off.

• Use cables suitable for the equipment to be connected.

• Connect the cables, fully inserting them into the connectors or jacks. A loose connection may cause hum and other noise.

• To disconnect the cable, pull it out by grasping the plug.

Never pull the cable itself.

• See the instruction manual of the equipment to be connected, too.

• Insert the plug securely into the AC IN socket.

• Use one of the two AC plug holders (supplied) to securely hold the AC plug.

Connecting the

Speakers (FWD-55B2/

46B2/42B2)

Connect the speakers SS-SPG02 (not supplied).

Please be sure to connect the speakers correctly. For more details on connecting the speakers, see the operating manual of the speakers. For details on how

to route the speaker cords, see page 21.

Connecting the AC

Power Cord

1

Plug the AC power cord into the AC IN socket. Then, attach the AC plug holder

(supplied) to the AC power cord.

AC power cord

AC IN socket

AC plug holder

2

Slide the AC plug holder over the cord until it connects to the AC IN socket cover.

AC IN socket cover

Lock

Clip

To remove the AC power cord

Release the clips of the AC plug holder from the lock of the AC IN socket cover, then hold the plug and pull out the AC power cord.

20

GB