NETWORK menu. Dukane MP-WU9101B, DLP MP-WU9101B, MPWU9101B, ImagePro 9100WUSS
Add to My manuals81 Pages
advertisement
NETWORK menu
NETWORK menu
Remember that incorrect network settings on this projector may cause trouble on the network. Be sure to consult with your network administrator before connecting to an existing access point on your network.
NOTE • The network function is not available when STANDBY MODE is set to SAVING and the projector is in standby mode. Connect the projector to the network after setting STANDBY MODE to NORMAL. ( 56 )
Item
NETWORK MODE
INFORMATION
Description
Switches NETWORK MODE. Select USER.
USER ó SERVICE
NETWORK
MODE
DHCP
Displays USER or SERVICE of NETWORK MODE.
IP ADDRESS
SUBNET
MASK
Displays the DHCP setting.
Displays the IP address.
This function can only be used when DHCP is set to OFF.
Displays the subnet mask.
This function can only be used when DHCP is set to OFF.
DEFAULT
GATEWAY
Displays the default gateway.
This function can only be used when DHCP is set to OFF.
Displays the DNS server address.
DNS SERVER
NOTE • This setting cannot be obtained automatically.
MAC
ADDRESS
(continued on next page)
Displays the MAC address.
62
Item
SETUP
APPLY
(continued on next page)
NETWORK menu
Description
Configures wired network.
NOTE ・ Setting values are not saved if Menu disappears before selecting APPLY.
・ Execute APPLY after changing the settings.
DHCP
IP ADDRESS
SUBNET
MASK
DEFAULT
GATEWAY
DNS
SERVER
Switches on/off of DHCP.
When DHCP is on, an IP address is obtained automatically.
Configures the IP address when DHCP is disabled.
Enter the IP ADDRESS.
This function can only be used when DHCP is set to
OFF.
Configures the subnet mask when DHCP is disabled.
Enter the SUBNET MASK.
This function can only be used when DHCP is set to
OFF.
Configures the default gateway when DHCP is disabled.
Enter the DEFAULT GATEWAY address.
This function can only be used when DHCP is set to
OFF.
Configures the DNS server address.
Enter the DNS server address.
NOTE
・ This setting cannot be obtained automatically.
Saves the network settings above.
63
NETWORK menu
Item
EXTERNAL
CONTROL
AMX D.D.
(AMX Device
Discovery)
Description
Turns on/off the AMX Device Discovery.
ON ó OFF
When ON is selected, the projector can be detected by controllers of AMX connected to the same network.
For the details of AMX Device Discovery, visit the AMX web site.
URL: http://www.amx.com/
CRESTRON
EXTRON
Turns on/off the Crestron Connected
ON ó OFF
TM .
When ON is selected, controlling and managing the projector can be performed by using the controllers of Crestron connected to the same network. For the details of Crestron Connected TM , visit the following web site.
URL: http://www.crestron.com/
Turns on/off the Extron.
ON ó OFF
When ON is selected, the controllers of Extron connected using HDBaseT TM can detect the projector.
For the details of Extron, visit the following web site.
URL: http://www.extron.com/
64
advertisement
Related manuals
advertisement
Table of contents
- 3 Introduction
- 8 Setting up
- 21 Remote control
- 22 Using the REMOTE ID function
- 24 Power on/off
- 25 Operating
- 47 EASY MENU
- 48 PICTURE menu
- 52 IMAGE menu
- 53 INPUT menu
- 54 SETUP menu
- 57 SCREEN menu
- 58 OPTION menu
- 62 NETWORK menu
- 65 Web Control
- 67 Maintenance
- 70 Troubleshooting