advertisement
CU515_Eng_0919 9/19/07 4:43 PM Page 26
In-Call Menu
Your phone provides a number of control functions that you can use during a call. To access these functions during a call, press the right soft key [ Options ].
During a Call
The menu displayed on the handset screen during a call is different from the default main menu displayed when in idle screen, and the options are described below.
Making a Second Call
You can select a number you wish to dial from the Address Book to make a second call. Press the right soft key then select Contacts.
Swapping Between Two Calls
By using three methods, you can switch between two calls.
1.
Press the [send] key.
2.
Press the left/right navigation key.
3.
Press the right soft key and then select "
Swap Calls".
Answering an Incoming Call
To answer an incoming call when the handset is ringing, simply press the [SEND] key.
The handset is also able to warn you of an incoming call while you are already on a call. A tone sounds in the earpiece, and the display will show that a second call is waiting. This feature, known as Call Waiting , is only available if your network supports it.
If Call Waiting is on, you can put the first call on hold and answer the second call, by pressing the [SEND] key.
Rejecting an Incoming Call
You can reject an incoming call without answering by simply pressing the [END] key.
During a call, you can reject an incoming call by pressing the [END] key.
Muting the Microphone
You can mute the microphone during a call by pressing the left soft key [ Mute ]. The handset can be unmuted by pressing the left soft key
[ Unmute ]. When the handset is muted, the caller cannot hear you, but you can still hear the caller.
26
advertisement