III. Quick Start. JOBO SnapScan 9000, SNAPSCAN 9000 - V1.5

III. Quick Start

Right/+   button  

Left/ ‐   button

SD   card   Slot  

Power   button

USB   port  

TV   out   jack

9

Power   status   LED  

OK   button  

Film   Slot  

1. Put Film onto the film cartridge

2. Insert the film cartridge into JOBO SnapScan 9000

10

3. Connect power USB cable to SnapScan 9000

4. Turn on Device by pressing the power button

11

5. Press OK button to capture the image

6. Follow the menu on display for scanning

12

7. After finished the capture, take out the SD card which stored capture images

8. Or read picture from PC by MSDC mode

13