Spirolab
User manual
To turn spirolab off, press the power button on the front of the unit.
WARNING
Spirolab does not turn off completely but enters an ultra-low standby mode; some features remain active to allow the device to keep the date and time updated and to be activated remotely if required. For this reason, the power key's symbol is , corresponding to the standby mode.
2.2
Saving energy
The internal battery pack charge is shown in the upper right hand corner of the display by the symbol:
If the battery symbol is all green, then the battery pack is charged.
WARNING
To charge the battery pack, only use the charger supplied by the manufacturer.
2.3
Main screen
The device’s features can be accessed from the main screen.
The following section details the features of each icon.
2.4
Symbols and icons
The following table shows the icons displayed on the various screens and what they mean
ICON DESCRIPTION
To access initial settings (service menu)
To enter new patient data
To edit patient data/To rerun an archived patient test
To access file containing tests performed
To save the settings and return to the main screen
To view the last spirometry session for the current patient
To view the last oximetry session for the current patient
Rev.1.3 Page 14 of 34
