Each option selected will bring up a box in which you can enter the search data.
2.7.2
Viewing archived data
The archive displays the list of patients, starting with the most recent.
Select the patient required by tapping the line (which becomes orange) and choose one of the enabled functions listed at the bottom of the screen.
The enabled icons are coloured, while the grey ones are disabled.
To quit the archive, use the icon .
Spirolab
User manual
To view the spirometry tests performed by the selected patient, use the icon .
The information is displayed as in the image on the right. On the left you have the test trend in graph form, while on the right you have various quality-related messages and the values of the parameters selected in the service menu. By swiping your finger in the parameter area, you can view other parameters selected in the service menu.
You can delete one of the tests performed as follows: tap the column relating to the test data to be deleted; the data will be selected by two bands on the left and right; now tap the icon on the lower right. And tap “OK” in the popup window which appears on the screen.
At each screen, you can go back to the previous step by tapping
.
To view the selected patient's oximetry tests, use the icon .
The data is displayed as in the image to the right, with the graphic trend of the % SpO2 and BPM always on the left and the numerical values of the various parameters on the right.
You may cancel the test by using the icon on the lower right.
If you want to perform a new test on the selected patient from this screen, you can use the icon for the test to be performed; a message is displayed to confirm whether or not you wish to perform a new test on the selected patient. Tap "YES" to confirm or "NO" to go back.
If the patient has performed several spirometry or oximetry tests, the initial list indicates (in brackets next to the type of test) the number of tests saved.
To view tests other than the first, tap the icons (for spirometry) or (for oxymetry).
2.7.3
Displaying the last test session
During test sessions, the spirometer automatically saves up to 8 FVC tests. From the main screen, using the icon:
in the case of spirometry tests
in the case of oximetry tests you can view the best three session tests (where PRE1 is the best). At the end of the session, when you enter a new subject or switch to a POST phase, the 3 best tests of the previous session are automatically saved in the archive. These, therefore, can be retrieved from the archive and printed, either together or individually.
Numbers may appear on the main screen, next to the spirometry test icons, for example:
Rev.1.3 Page 20 of 34
