advertisement
Safety Precautions
Chapter 2
Installing AP300
This chapter describes how to install and configure an AP300. It contains the following sections:
Safety Precautions
IMPORTANT—Read and follow the regulatory instructions in Appendix B before installing and operating
this product.
If an optional power supply is used, it must be one supplied by Meru Networks.
Warning!
This product is intended to be supplied by a UL Listed power supply marked Class 2 or LPS and rated minimum 5Vdc, 3A.
The AP300 is intended only for installation in Environment A as defined in IEEE 802.3af. All interconnected equipment must be contained within the same building, including the interconnected equipment's associated LAN connection.
© 2012 Meru Networks, Inc.
Installing AP300 7
advertisement
Related manuals
advertisement
Table of contents
- 15 Access Points
- 17 AP320i
- 18 AP332e
- 18 AP332i
- 21 Installing AP
- 21 Safety Precautions
- 22 Best Practices for an AP300/AP1000 Network
- 23 Unpack the AP
- 24 Determine Power Requirements
- 24 802.af PoE Usage
- 24 802.3at PoE Usage
- 25 Installation Requirements
- 26 Additional Equipment
- 26 Install the AP
- 26 Select a Location
- 27 Attach the Provided Antennas
- 30 Install the Remote Antenna Mount (optional)
- 35 Install Antennas With One Connector (optional)
- 37 Install the Access Point
- 43 Check AP300 LED Activity
- 45 Where to Go From Here
- 47 Installing AP320i
- 47 Safety Precautions
- 48 Best Practices for an AP320i/AP1000 Network
- 49 Unpack the AP320i
- 49 Determine Power Requirements
- 49 802.af PoE Usage
- 50 802.3at Usage
- 50 Additional Equipment
- 51 Installing AP320i
- 51 Select a Location
- 52 Install the Access Point
- 65 Check AP320i LED Activity
- 67 Where to Go From Here
- 69 Installing AP332e
- 69 Safety Precautions
- 69 Unpack the AP332e
- 70 Installation Requirements
- 70 Additional Equipment
- 71 Install the AP332e
- 71 Select a Location
- 72 Attach the Provided Antennas
- 72 Install the Access Point
- 80 Check AP332e LED Activity
- 82 Where to Go From Here
- 83 Installing AP332i
- 83 Safety Precautions
- 83 Unpack the AP332i
- 84 Additional Equipment
- 84 Installing AP332i
- 84 Select a Location
- 85 Install the Access Point
- 92 Check AP332i LED Activity
- 94 Where to Go From Here
- 95 Cautions and Warnings
- 95 Cautions
- 97 Warnings
- 101 Regulatory Information
- 101 For AP300/320i
- 101 Radio
- 101 Safety
- 102 Underwriters Laboratories
- 103 FCC Radiation Exposure Statement
- 103 Radio Frequency Interference Requirements
- 104 Canada. Industry Canada (IC)
- 106 Europe—EU Declaration of Conformity and Restrictions
- 109 IEEE 802.11a Restrictions
- 109 EEE 802.11b/g Restrictions
- 109 Japan
- 110 Singapore
- 110 Manufacturing Information
- 110 AP300 Plenum Requirements
- 111 Supported PoEs
- 111 Supported Power Over Ethernet Devices for Meru APs
- 113 Optional External Antennas
- 113 ACC-ANT-ABGN
- 114 ACC-ANT-O6ABGN-0606-O
- 115 ACC-ANT-O6ABGN-0607-PT
- 116 ACC-ANT-O1BG-1300-PN
- 118 ACC-ANT-6ABGN