advertisement
For AP300/320i
Appendix B
Regulatory Information
The Meru Access Point (APs) must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. For country-specific approvals, see below. Meru Networks, Inc. is not responsible for any radio or television interference caused by unauthorized modification of APs, or the substitution or attachment of connecting cables and equipment other than that specified by Meru Networks, Inc. The correction of interference caused by such unauthorized modification, substitution or attachment is the responsibility of the user. Meru Networks, Inc. and its authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from the user failing to comply with these guidelines.
For AP300/320i
Radio
FCC Part 15
Canada RSS210
EN 300 328 V1.6.1 (11/2004)
EN 301 893 V1.3.1 (08/2005)
Japan Technical Regulations
EMC
FCC Part 15
EN 301 489-17 V1.2.1 (08/2002)
Japan VCCI
Safety
Prolonged exposure to RF radiation can be hazardous. Switch off unit power before service or installation procedures.
© 2012 Meru Networks, Inc.
Regulatory Information 87
advertisement
Related manuals
advertisement
Table of contents
- 15 Access Points
- 17 AP320i
- 18 AP332e
- 18 AP332i
- 21 Installing AP
- 21 Safety Precautions
- 22 Best Practices for an AP300/AP1000 Network
- 23 Unpack the AP
- 24 Determine Power Requirements
- 24 802.af PoE Usage
- 24 802.3at PoE Usage
- 25 Installation Requirements
- 26 Additional Equipment
- 26 Install the AP
- 26 Select a Location
- 27 Attach the Provided Antennas
- 30 Install the Remote Antenna Mount (optional)
- 35 Install Antennas With One Connector (optional)
- 37 Install the Access Point
- 43 Check AP300 LED Activity
- 45 Where to Go From Here
- 47 Installing AP320i
- 47 Safety Precautions
- 48 Best Practices for an AP320i/AP1000 Network
- 49 Unpack the AP320i
- 49 Determine Power Requirements
- 49 802.af PoE Usage
- 50 802.3at Usage
- 50 Additional Equipment
- 51 Installing AP320i
- 51 Select a Location
- 52 Install the Access Point
- 65 Check AP320i LED Activity
- 67 Where to Go From Here
- 69 Installing AP332e
- 69 Safety Precautions
- 69 Unpack the AP332e
- 70 Installation Requirements
- 70 Additional Equipment
- 71 Install the AP332e
- 71 Select a Location
- 72 Attach the Provided Antennas
- 72 Install the Access Point
- 80 Check AP332e LED Activity
- 82 Where to Go From Here
- 83 Installing AP332i
- 83 Safety Precautions
- 83 Unpack the AP332i
- 84 Additional Equipment
- 84 Installing AP332i
- 84 Select a Location
- 85 Install the Access Point
- 92 Check AP332i LED Activity
- 94 Where to Go From Here
- 95 Cautions and Warnings
- 95 Cautions
- 97 Warnings
- 101 Regulatory Information
- 101 For AP300/320i
- 101 Radio
- 101 Safety
- 102 Underwriters Laboratories
- 103 FCC Radiation Exposure Statement
- 103 Radio Frequency Interference Requirements
- 104 Canada. Industry Canada (IC)
- 106 Europe—EU Declaration of Conformity and Restrictions
- 109 IEEE 802.11a Restrictions
- 109 EEE 802.11b/g Restrictions
- 109 Japan
- 110 Singapore
- 110 Manufacturing Information
- 110 AP300 Plenum Requirements
- 111 Supported PoEs
- 111 Supported Power Over Ethernet Devices for Meru APs
- 113 Optional External Antennas
- 113 ACC-ANT-ABGN
- 114 ACC-ANT-O6ABGN-0606-O
- 115 ACC-ANT-O6ABGN-0607-PT
- 116 ACC-ANT-O1BG-1300-PN
- 118 ACC-ANT-6ABGN