4.7.11 DHCP Snooping. Advantech EKI-7706E-2F, EKI-7706E-2FI, EKI-7706G-2F, EKI-7706G-2FI
Add to My manuals173 Pages
advertisement
Item
Port
Add
Description
Select the port to configure for the IP source guard.
Click Add to add an IP source guard.
The ensuing table for Entry Information settings are informational only: Source
MAC, Source IP, Port and Modify (Click Delete to delete the desired option).
4.7.11
DHCP Snooping
4.7.11.1
Global Settings
To access this page, click Security > DHCP Snooping > Global Settings .
Figure 4.86 Security > DHCP Snooping > Global Settings > DHCP Snooping
State Settings
The following table describes the items in the previous figure.
Item
DHCP Snooping
State
Apply
Description
Click Enabled or Disabled to set DHCP snooping state.
Click Apply to save the values and update the screen.
Figure 4.87 Security > DHCP Snooping > Global Settings > DHCP Snooping
Port Settings
The following table describes the items in the previous figure.
Item Description
DHCP Snooping Port
Select
Select the port to configure for the DHCP Snooping port.
Enabled Click Enabled or Disabled to enable DHCP Snooping port.
Apply Click Apply to save the values and update the screen.
93 EKI-7706 Series User Manual
advertisement
Related manuals
advertisement
Table of contents
- 15 Specifications
- 16 Hardware Views
- 16 Front View
- 18 Rear View
- 18 Top View
- 19 Bottom View
- 21 Installation Guidelines
- 21 Connecting Hardware
- 21 Verifying Switch Operation
- 22 Installing the Switch
- 22 DIN Rail Mounting
- 24 Wall-Mounting
- 27 Installing and Removing SFP Modules
- 27 Installing SFP Modules
- 29 Removing SFP Modules
- 30 Connecting the Switch to Ethernet Ports
- 30 RJ45 Ethernet Cable Wiring
- 31 Connecting the Switch to Console Port
- 32 Power Supply Installation
- 32 Overview
- 33 Considerations
- 33 Grounding the Device
- 34 Wiring a Relay Contact
- 34 Wiring the Power Inputs
- 36 Reset Button
- 38 First Time Setup
- 38 Overview
- 38 Introduction
- 38 Administrative Interface Access
- 39 Using the Graphical (Web) Interface
- 39 Configuring the Switch for Network Access
- 40 Configuring the Ethernet Ports
- 41 Command Line Interface Configuration
- 41 Introduction to Command-Line Interface (CLI)
- 41 Accessing the CLI
- 42 Web Browser Configuration
- 42 Preparing for Web Configuration
- 42 System Login
- 44 Log In
- 44 Recommended Practices
- 44 Changing Default Password
- 45 Monitoring
- 45 Device Information
- 46 Logging Message
- 47 Port Monitoring
- 48 Link Aggregation
- 49 LLDP Statistics
- 50 IGMP Statistics
- 51 MLD Statistics
- 52 System
- 52 IP Settings
- 53 IPv6 Settings
- 54 DHCP Client Option
- 55 DHCP Auto Provision
- 55 Management VLAN
- 56 System Time
- 57 Network Port
- 58 L2 Switching
- 58 Port Configuration
- 59 Port Mirror
- 60 Link Aggregation
- 63 802.1Q VLAN
- 66 Q-in-Q
- 70 802.3az EEE
- 70 Multicast
- 75 Jumbo Frame
- 76 4.5.10 Spanning Tree
- 81 4.5.11 X-Ring Elite
- 82 4.5.12 X-Ring Pro
- 85 4.5.13 Loopback Detection
- 86 4.5.14 ERPS
- 88 MAC Address Table
- 88 Static MAC
- 88 MAC Aging Time
- 89 Dynamic Forwarding Table
- 90 Security
- 90 Storm Control
- 92 Port Security
- 92 Protected Ports
- 93 DoS Prevention
- 95 Applications
- 98 802.1x
- 99 IP Security
- 100 Security Login
- 103 Access Control List
- 105 4.7.10 IP Source Guard
- 106 4.7.11 DHCP Snooping
- 107 4.7.12 ARP Spoofing
- 108 General
- 114 QoS Basic Mode
- 115 Rate Limit
- 117 Bandwidth Guarantee
- 119 Management
- 125 Power Over Ethernet
- 127 TCP Modbus Settings
- 128 DHCP Server
- 134 SMTP Client
- 140 NTP Server
- 141 Diagnostics
- 141 4.10.1 Cable Diagnostics
- 142 4.10.2 Ping Test
- 143 4.10.3 IPv6 Ping Test
- 145 4.10.4 System Log
- 147 4.10.5 DDM
- 148 4.10.6 LED Indication
- 149 Tools
- 149 4.11.1 IXM
- 149 4.11.2 Backup Manager
- 151 4.11.3 Upgrade Manager
- 152 4.11.4 Dual Image
- 152 4.11.5 Save Configuration
- 152 4.11.6 User Account
- 153 4.11.7 N-Key
- 153 4.11.8 Reset System
- 153 4.11.9 Reboot Device
- 153 Modbus/TCP Mapping
- 155 4.12.1 Modbus/TCP Mapping Table
- 172 Troubleshooting