4.10.3 IPv6 Ping Test. Advantech EKI-7706E-2F, EKI-7706E-2FI, EKI-7706G-2F, EKI-7706G-2FI
Add to My manuals173 Pages
advertisement
Item
Ping Results
Description
Display the reply format of ping.
PING 172.17.8.254 (172.17.8.254): 56 data bytes
--- 172.17.8.254 ping statistics ---
4 packets transmitted, 0 packets received, 100% packet loss
Or
PING 172.17.8.93 (172.17.8.93): 56 data bytes
64 bytes from 172.17.8.93: icmp_seq=0 ttl=128 time=0.0 ms
64 bytes from 172.17.8.93: icmp_seq=1 ttl=128 time=0.0 ms
64 bytes from 172.17.8.93: icmp_seq=2 ttl=128 time=0.0 ms
64 bytes from 172.17.8.93: icmp_seq=3 ttl=128 time=0.0 ms
--- 172.17.8.93 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss round-trip min/avg/max = 0.0/0.0/0.0 ms
Click Apply to display ping result for the IP address.
Apply
4.10.3
IPv6 Ping Test
The IPv6 Ping Test page allows you to configure the Ping Test for IPv6.
To access this page, click Diagnostics > IPv6 Ping Test .
Figure 4.133 Diagnostics > IPv6 Ping Test
EKI-7706 Series User Manual 130
The following table describes the items in the previous figure.
Item
IPv6 Address
Count
Interval (in sec)
Size (in bytes)
Ping Results
Apply
Description
Enter the IP address or host name of the station you want the switch to ping. The initial value is blank. The IP Address or host name you enter is not retained across a power cycle. Host names are composed of series of labels concatenated with dots. Each label must be between 1 and 63 characters long, and the entire hostname has a maximum of 64 characters.
Enter the number of echo requests you want to send. The default value is 4. The value ranges from 1 to 5. The count you enter is not retained across a power cycle.
Enter the interval between ping packets in seconds. The default value is 1. The value ranges from 1 to 5. The interval you enter is not retained across a power cycle.
Enter the size of ping packet. The default value is 56. The value ranges from 8 to 5120. The size you enter is not retained across a power cycle.
Display the reply format of ping.
PING 2222::777 (2222::777): 56 data bytes
--- 2222::777 ping statistics ---
4 packets transmitted, 0 packets received, 100% packet loss
Or
PING 2222::717 (2222::717): 56 data bytes
64 bytes from 2222::717: icmp6_seq=0 ttl=128 time=10.0 ms
64 bytes from 2222::717: icmp6_seq=1 ttl=128 time=0.0 ms
64 bytes from 2222::717: icmp6_seq=2 ttl=128 time=0.0 ms
64 bytes from 2222::717: icmp6_seq=3 ttl=128 time=0.0 ms
--- 2222::717 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss round-trip min/avg/max = 0.0/2.5/10.0 ms
Click Apply to display ping result for the IP address.
131 EKI-7706 Series User Manual
advertisement
Related manuals
advertisement
Table of contents
- 15 Specifications
- 16 Hardware Views
- 16 Front View
- 18 Rear View
- 18 Top View
- 19 Bottom View
- 21 Installation Guidelines
- 21 Connecting Hardware
- 21 Verifying Switch Operation
- 22 Installing the Switch
- 22 DIN Rail Mounting
- 24 Wall-Mounting
- 27 Installing and Removing SFP Modules
- 27 Installing SFP Modules
- 29 Removing SFP Modules
- 30 Connecting the Switch to Ethernet Ports
- 30 RJ45 Ethernet Cable Wiring
- 31 Connecting the Switch to Console Port
- 32 Power Supply Installation
- 32 Overview
- 33 Considerations
- 33 Grounding the Device
- 34 Wiring a Relay Contact
- 34 Wiring the Power Inputs
- 36 Reset Button
- 38 First Time Setup
- 38 Overview
- 38 Introduction
- 38 Administrative Interface Access
- 39 Using the Graphical (Web) Interface
- 39 Configuring the Switch for Network Access
- 40 Configuring the Ethernet Ports
- 41 Command Line Interface Configuration
- 41 Introduction to Command-Line Interface (CLI)
- 41 Accessing the CLI
- 42 Web Browser Configuration
- 42 Preparing for Web Configuration
- 42 System Login
- 44 Log In
- 44 Recommended Practices
- 44 Changing Default Password
- 45 Monitoring
- 45 Device Information
- 46 Logging Message
- 47 Port Monitoring
- 48 Link Aggregation
- 49 LLDP Statistics
- 50 IGMP Statistics
- 51 MLD Statistics
- 52 System
- 52 IP Settings
- 53 IPv6 Settings
- 54 DHCP Client Option
- 55 DHCP Auto Provision
- 55 Management VLAN
- 56 System Time
- 57 Network Port
- 58 L2 Switching
- 58 Port Configuration
- 59 Port Mirror
- 60 Link Aggregation
- 63 802.1Q VLAN
- 66 Q-in-Q
- 70 802.3az EEE
- 70 Multicast
- 75 Jumbo Frame
- 76 4.5.10 Spanning Tree
- 81 4.5.11 X-Ring Elite
- 82 4.5.12 X-Ring Pro
- 85 4.5.13 Loopback Detection
- 86 4.5.14 ERPS
- 88 MAC Address Table
- 88 Static MAC
- 88 MAC Aging Time
- 89 Dynamic Forwarding Table
- 90 Security
- 90 Storm Control
- 92 Port Security
- 92 Protected Ports
- 93 DoS Prevention
- 95 Applications
- 98 802.1x
- 99 IP Security
- 100 Security Login
- 103 Access Control List
- 105 4.7.10 IP Source Guard
- 106 4.7.11 DHCP Snooping
- 107 4.7.12 ARP Spoofing
- 108 General
- 114 QoS Basic Mode
- 115 Rate Limit
- 117 Bandwidth Guarantee
- 119 Management
- 125 Power Over Ethernet
- 127 TCP Modbus Settings
- 128 DHCP Server
- 134 SMTP Client
- 140 NTP Server
- 141 Diagnostics
- 141 4.10.1 Cable Diagnostics
- 142 4.10.2 Ping Test
- 143 4.10.3 IPv6 Ping Test
- 145 4.10.4 System Log
- 147 4.10.5 DDM
- 148 4.10.6 LED Indication
- 149 Tools
- 149 4.11.1 IXM
- 149 4.11.2 Backup Manager
- 151 4.11.3 Upgrade Manager
- 152 4.11.4 Dual Image
- 152 4.11.5 Save Configuration
- 152 4.11.6 User Account
- 153 4.11.7 N-Key
- 153 4.11.8 Reset System
- 153 4.11.9 Reboot Device
- 153 Modbus/TCP Mapping
- 155 4.12.1 Modbus/TCP Mapping Table
- 172 Troubleshooting