advertisement
3.1
Communication Setting
3.1.1
Bluetooth
The calibrator communicates with the mobile phone App via Bluetooth.
Table 13 Bluetooth communication setting
Item
Bluetooth state
Bluetooth name
Effective value
Open/close
Support letters, numbers or symbols
Description
Open or close Bluetooth function
Set the Bluetooth name of the calibrator
Physical address Read only
3.1.2 Wireless Communication
This setting is only provided when optional module is a WIFI module, at this time the device can be connected to the wireless network through the WIFI module.
Table 14 Wireless communication setting
Item
WLAN
Effective value
Open/close
Description
Open or close Wi-Fi
Wireless network Depends on the network environment Wireless network access point selection
Advanced options DHCP/manually Choose how to get device address
◆ The port number and physical address are factory settings and cannot be changed
1.
When DHCP is selected for advanced options, the contents of the following table are automatically allocated by the system and become read-only items;
2. When the manual mode is selected for the advanced options, the contents of the following table must be filled
31
advertisement
Related manuals
advertisement
Table of contents
- 9 Safety Instructions
- 10 1. Introduction
- 10 1.1 Overview
- 11 Accuracy
- 16 Specification
- 19 Structure
- 21 2. Display and Operation
- 25 2.3.1 Zeroing
- 26 2.3.2 Statistics
- 26 2.3.3 Filtering
- 27 2.3.4 Unit Switch
- 27 2.3.5 Pressure Setting
- 28 2.3.6 Display Resolution Setting
- 30 2.4.1 Measuring Item Switch
- 30 2.4.2 Zeroing
- 30 2.4.3 Scaling
- 30 2.4.4 Filtering
- 31 2.4.5 Statistics
- 38 3. Setting
- 39 3.1.1 Bluetooth
- 39 3.1.2 Wireless Communication
- 40 3.1.3 Serial Communication
- 41 3.1.4 ACloud Service
- 41 3.2.1 Custom Units
- 42 3.2.2 CSV File Format
- 42 3.2.3 Date & Time
- 42 3.2.4 Sound
- 43 3.2.5 Language
- 43 3.2.6 Display Direction
- 47 3.3.2 Repair and Maintenance
- 47 3.3.3 Restore Factory Settings
- 47 3.3.4 System Update
- 48 3.4.1 Display Brightness
- 48 3.4.2 Battary Information
- 48 3.4.3 Auto Backlight Off
- 48 3.4.4 Auto Power Off After Backlight Off
- 49 3.4.5 Charge Mode
- 50 4. Task (ADT673 only)
- 58 5. Data Log
- 59 6. Data Management
- 60 7. Application
- 63 8. HART Communicator (ADT673 only)