Operating instructions
Transponder-Coded Safety Switch CTP-AR
14. Ordering information and accessories
Tip!
Suitable accessories, such as cables or installation material, can be found at www.EUCHNER.de.
Simply enter the order number of your item in the search box and open the item view. “Accessories” contains accessories that can be combined with the item.
15. Inspection and service
WARNING
Danger of severe injuries due to the loss of the safety function.
Ì If damage or wear is found, the complete switch and actuator assembly must be replaced. Replacement of individual parts or assemblies is not permitted
Ì Check the device for proper function at regular intervals and after every fault. For information about possible time intervals, refer to EN ISO 14119:2013, section 8.2.
Regular inspection of the following is necessary to ensure trouble-free long-term operation:
Ì
Check the switching function (see chapter
11.3. Functional check on page 29
)
Ì Check all additional functions (e.g. escape release, lockout mechanism, etc.)
Ì Check the secure fastening of the devices and the connections
Ì Check for soiling
No servicing is required. Repairs to the device are only allowed to be made by the manufacturer.
NOTICE
The year of manufacture is given in the laser marking at the bottom right corner. The current version number in the format (V X.X.X) can also be found on the device.
16. Service
If service support is required, please contact:
EUCHNER GmbH + Co. KG
Kohlhammerstraße 16
D-70771 Leinfelden-Echterdingen
Service telephone:
+49 711 7597-500
E-mail:
[email protected]
Internet:
www.euchner.de
38
(translation of the original operating instructions) 123041-03-07/15
