advertisement
![21) Trailer Hitch. Can-Am Outlander 400 EFI CE | Manualzz 21) Trailer Hitch. Can-Am Outlander 400 EFI CE | Manualzz](http://s1.manualzz.com/store/data/067534381_1-3402ffaf2430e6835c0fe6a36c0720f2-360x466.png)
WARNING
– Never carry a passenger on a cargo rack.
– Cargo must never interfere with the drivers line of sight or affect his ability to properly steer the vehicle.
– Do not overload the vehicle.
– Always ensure all cargo is properly secured and does not extend out pass the racks.
Refer to
SPECIFICATIONS
weight recommendations.
for cargo
21) Trailer Hitch
Convenient hitch to install a ball to tow a trailer or other equipment. Install the proper ball size as per trailer manufacturer recommendations. Refer to
SPECIFICATIONS
for carrying loads and towing recommendations.
CONTROLS/INSTRUMENTS/EQUIPMENT
WARNING
Ensure to install the proper ball size that matches the equipment you will tow.
NOTE: Follow manufacturer's instructions for proper attachment.
22) Tool Kit
The tool kit is located in the rear storage compartment. It contains tools for basic maintenance, this Operator's Guide and the
BASIC GUIDE TO
WINCHING TECHNIQUES
with the XT models .
23) Winch
XT Models
For proper winch operating instructions, refer to the
BASIC GUIDE TO
WINCHING TECHNIQUES
included with the vehicle.
V07L0TY
1. Trailer hitch
1 vmo2007-003-016_a
1. Winch
2. Roller fairlead
3. Winch hook
While reading this Operator’s Guide, remember that:
WARNING
Indicates a potential hazard that, if not avoided, could result in serious injury or death.
_______________
89
advertisement
Related manuals
advertisement
Table of contents
- 14 Training Course
- 15 European Community
- 16 OPERATION WARNINGS
- 45 RIDING THE VEHICLE
- 46 Pre-Ride Inspection
- 48 Clothing
- 49 Carrying a Passenger
- 50 Carrying Loads
- 50 Hauling a Trailer
- 51 Working with your Vehicle
- 51 Recreational Riding
- 52 Environment
- 52 Design Limitation
- 52 Off-Road Operation
- 53 General Operating and Safety Precautions
- 55 Riding Techniques
- 64 IMPORTANT ON-PRODUCT LABELS
- 64 Hang Tag
- 66 Vehicle Safety Labels
- 70 Compliance Labels
- 70 Technical Information Labels
- 72 CONTROLS/INSTRUMENTS/EQUIPMENT
- 75 1) Throttle Lever
- 75 2) 2WD/4WD Selector
- 76 3) LH Brake Lever
- 76 4) Brake Lock
- 77 5) Shift Lever
- 78 6) Headlight Dimmer Switch
- 78 7) Emergency Engine Stop Switch
- 79 8) Engine Start Button
- 79 9) Override Button
- 79 10) Multifunction Gauge
- 84 11) 12-Volt Power Outlet
- 85 12) Ignition Switch
- 86 13) Brake Pedal
- 86 14) Footpeg
- 86 15) Grab Handles
- 87 16) Passenger's Seat
- 88 17) Storage Box
- 89 18) Operator's Seat Latch
- 90 19) Rear Storage Compartment
- 90 20) Cargo Racks
- 91 21) Trailer Hitch
- 91 22) Tool Kit
- 91 23) Winch
- 92 24) Winch Control Switch
- 92 25) Vehicle Lock
- 92 26) Turn Signal Switch
- 92 27) Horn Button
- 93 28) Hazard Warning Button
- 93 29) Winch Remote Control
- 94 Recommended Fuel
- 94 Fueling Procedure
- 95 BREAK-IN PERIOD
- 95 Operation During Break-In
- 96 BASIC PROCEDURES
- 96 Starting the Engine
- 96 Changing Gear Selection
- 96 Stopping the Engine
- 97 SPECIAL PROCEDURES
- 97 What to Do if Water is in the CVT
- 97 What to Do if Water is in the Air Filter Housing
- 97 What to Do if Vehicle is Turned Over
- 97 What to Do if Vehicle is Immersed in Water