7 Operating and display elements. IFM PG2734

7 Operating and display elements

1

2

3

4

Mode/

Enter

Set 5

6

1: Analogue display

-Display of the current system pressure in kPa and MPa�

2: LED ring

According to the setting of parameter [LED] (→ 9.2):

-Display of set point and reset point�

-Lag indicator function for maximum value or minimum value�

-Display of pulsating signals and pressure peaks�

-Trend display: rising pressure or falling pressure�

3: Indicator LEDs

-LED 1, 2 = not used�

-LED 3 = system pressure of the digital display in kPa�

-LED 4 = system pressure of the digital display in MPa�

-LED 5 = not used�

-LED 6 = system pressure in % of the scaling (range ASP to AEP) or COF value in %�

-LED 7 = not used�

-LED 8 = switching status OUT1 (lights if output 1 is switched)

4: Alphanumeric display, 4 digits

-Display of the current system pressure�

-Display of the parameters and parameter values�

5: Touch button Set*

-Setting of the parameter values (continuously by touching permanently; step by step by touching briefly several times)�

15

UK