8�2 Explanation of the main menu. IFM PG2734

8.2 Explanation of the main menu

SP1/rP1 Upper / lower limit value for system pressure at which OUT1 switches�

OU1 Output function for OUT1:

• Switching signal for the pressure limit values: hysteresis function [H ��] or window function [F ��], either normally open [� no] or normally closed [� nc]�

OU2 tCOF tASP

Output function for OUT2:

• Analogue signal for the current system pressure: 4���20 mA [I], 20���4 mA

[InEG]�

Teach zero-point calibration� tAEP

EF

Teach analogue start point for system pressure: set measured value at which

4 mA is provided (20 mA if [OU2] = [InEG])�

Teach analogue end point for system pressure: set measured value at which

20 mA is provided (4 mA if [OU2] = [InEG])�

Extended functions / opening of menu level 2�

UK

17