General
How to Configure Modem Connection
At a Glance
Procedure
This procedure can configure the modem connection in the
Windows XP Professional and Windows VISTA Professional Edition 32 systems in order to initialize the communication.
This procedure describes the different steps of the configuration:
Step
1
Action
Once the Use Modem box is checked,
Result
Modem Communication
Use Modem
Hayes
Tel No.
Password
AT&F&KDT
2668
User
2
3
OK Cancel
Obtain the parameters of the telephone number fields, the Hayes
Initialization string and the password.
Note:
The AT initialization command obtained is AT&F&KDT for the COM1 modems
(with &F: default configuration, &K: flow control deactivated, DT: dialing).
The telephone number is that of the station to be called (in this example 2668).
The password is that to be sent to the remote equipment when the latter is configured with a list of callers provided with a password (see List of
passwords, p. 97 ).
Confirm with the OK button.
35013154.02 07/2208
87
