General
How to Modify the Modem Link Parameters
At a Glance
Procedure
This procedure can configure the transmission parameters on Windows
XP Professional and Windows VISTA Professional Edition 32 systems for modem communication.
This procedure describes the different steps of the configuration:
Step
1
Action
Select the tab Link Parameters .
Result
Station Parameters
Uni-telway Link Parameters Advanced
Speed
9600 bits/s
Self-adaptation
Valid
Data
7 bits
8 bits
1
Parity
Impair
Pair
Without
RTS/CTS Delay
Use CTS 1
Default second
Stop Bits
1 bit
2 bits
X 100 ms
OK Cancel
2
3 z z
Configure the transmission parameters:
Parity
The data bits and the stop bits :identical to parameters of the contacted station z the other parameters : unmodified
Confirm with the OK button.
88
35013154.02 07/2208
