How to add a device on to the bus
Fipio Configuration
35013154.02 07/2208
269
Fipio Configuration
Procedure This operation is used to logically add a device connected to the FIPIO bus.
Step
1
2
Action
Access the FIPIO configuration screen.
Result : the Add/Modify a device screen appears.
Connection point
Connection point number
Comment
1
1
0 TBX DSS 1622
Families
2
ADVANTYS STB
ATV-16
ATV-58
ATV-58F
ATV-68
CCX-17
CCX17-32
INDUCTEL
LEXIUM
MAGELIS
MOMENTUM
PASSERELLE
SIMULATION
STD_P
TBX
1.0
TBX AES 400
TBX AMS 620
TBX ASS 200
TBX CEP 1622
TBX CSP 1622
TBX CSP 1625
TBX DES 1622
TBX DES 1633
TBX DES 16C22
4 ENT.ANA.MULTI-RANGE
6 ENT.HN 2 ANALOG OUTPUTS
2 ISOLATED ANALOG OUTPUTS
TBX7 MONOBLOC 16 E 24VCC
TBX7 MONOBLOC 16SS 24Vcc
TBX7 MONOBLOC 16SR 24Vcc
TBX7 EMB. 16E 24VCC
TBX7 EMB. 16E 48VCC
TBX7 EMB. 16E CF 24VCC
Communicator
TBX LEP 030 TBX7 MOD.COM.FIP TOR+ANA
OK
4
5
6
7
3 Enter the connection point number which corresponds to the address.
By default, the PL7 software offers the first consecutive address which is free
Add a comment to the device connected to the connection point.
This field has a maximum length of 80 characters and is optional.
In the Family field, select the type of equipment to be connected to the bus.
Select the standard module and/or the extension module.
In the Communicator field, select the type of element enabling communication on the FIPIO bus.
For certain types of device, this window does not appear.
270
35013154.02 07/2208
Step
8
Action
Confirm with Ok .
Result: the module is registered.
Fipio Configuration
35013154.02 07/2208
271
