Fipio Debugging
Debugging mode
Introduction
Inaccessible functions
Debugging mode can only be accessed in online mode.
This mode: z z uses a red square to display when a device is faulty from the FIPIO configuration screen, and adjusts and debugs the devices connected to the FIPIO bus from their application screen.
The following functions can not be accessed from the FIPIO configuration screen in online mode: z z z z adding on a device in online mode, duplicating or moving a device, modifying a device, deleting a device.
A message displayed in the status bar of the PL7 window gives the reason why access is denied.
304
35013154.02 07/2208
