4. PLC application. Schneider Electric XBTH / P / E / HM / PM Alphanumeric and Matrix Terminals

4. PLC application

4. PLC application

The dialog table (%MW10 to %MW14) can be used if the authorization word (%MW12) is equal to A505 in hexadecimal.

The designer can use various words from the dialog table.

Word %MW10 contains the image of the function keys (F1 key pressed

: bit %MW10,0=1).

Word %MW11 contains the number of the page to be displayed (1 or 2 in the example).

Word %MW13 controls the display of the function key LEDs (F1 key bit

%MW13,0).

Setting bit %MW14,0 to 1 makes the alarm page appear blinking, press

ENTER to steady the display.

After transferring the application into the terminal, connect the latter to the PLC (see service instructions for wiring : example cable XBT-Z968 for TSX07 with UNITELWAY).

E - 10 Magelis