Embedded Expert I/O
Controller Power Distribution Module Section 9.3
Controller Power Distribution Module
Controller Power Distribution Module
Presentation
The controller power distribution module is divided into 3 power supplies:
Power 24 Vdc expert modules
Main power 24 Vdc (for controller, fieldbus and slice power supply)
Power 24 Vdc I/O
There is no configuration necessary for this module.
I/O Mapping Tab
Variables can be defined and named in the I/O Mapping tab. Additional information such as topological addressing is also provided in this tab.
This table describes the controller power distribution module I/O mapping configuration:
Channel Type Description
Inputs IB0
I0
BYTE
BOOL
–
–
Default value
I1
I2
State of all inputs (bits 3-7 = 0, not used)
Power 24 Vdc expert modules
False when 24 Vdc is applied.
Main power 24 Vdc
False when 24 Vdc is applied.
Power 24 Vdc I/O
False when 24 Vdc is applied.
NOTE: When all power is present, the IB0 channel = 00 hex.
100
EIO0000004135 09/2020
Modicon M258 Logic Controller
TM5 Modules
EIO0000004135 09/2020
TM5 Modules Chapter 10
TM5 Modules
Introduction
The TM5 Bus contains:
Embedded I/O modules
TM5 expansion modules
This chapter describes how to configure the TM5 Bus.
What Is in This Chapter?
This chapter contains the following sections:
Section
10.1
10.2
10.3
Topic
TM5 Manager Configuration
Embedded Regular I/O Modules Configuration
TM5 Expansion Modules Configuration
Page
102
105
125
EIO0000004135 09/2020
101
