advertisement
Grease Pumps Quick Reference
Technical Specifi cations and Selection Chart
Manual Number
Continuous-Duty
Flow Rate
Maximum
Fluid
Pressure
Air Motor
Effective
Diameter
Operating
Range
Approximate
Air Use
Wetted Materials
Air Inlet
Port
Size
Material
Inlet
Material
Outlet
Manual 309966
Mini Fire-Ball 225, 50:1
0.32 lb/min
(.15 kg/min.)
8400 psi
(578 bar)
2.25 in
(57.2 mm)
Line Length
‡
: Up to 100 ft (30.5 m)
Annual Usage: Up to 5,000 lb (2,268 kg)
40-140 psi
(3-10 bar)
7.3 scfm @ 0.41 lb/min.
(.18 kg/min)
@ 100 psi @ 80 cpm
Steel, Urethane,
Aluminum, Buna-N,
Brass, Ethylene,
Delrin ®
Dispense Points: 1
Typical Applications: Small maintenance facility
3/8 in npt(f)
Slotted
1/4 in npt(f)
Manual 308883
Fire-Ball 300, 50:1
1.19 lb/min.
(.54 kg/min.)
8400 psi
(580 bar)
3 in
(76.2 cm)
30-140 psi
(3.0-9.7 bar)
22.8 cfm @100 psi
(7 bar)
CS, Delrin ® , Buna-N,
Polyurethane
3/8 in npt(f)
Slotted
Line Length
‡
: Up to 250 ft (76.2 m)
Annual Usage: Up to 10,000 lb (4,535 kg)
Dispense Points: 1 to 2
Typical Applications: High pressure grease to 8400 psi (579 bar)
1/4 in npt(f)
Fire-Ball 425, 50:1
3.35 lb/min
(1.5 kg/min.)
7500 psi
(517 bar)
4.25 in
(10.8 mm)
40-150 psi
(2.8-10.4 bar)
19 cfm @70 psi
(4.8 bar)
CS, Leather
1/2 in npt(f)
Slotted
3/8 in npt(f)
Manual
306674/ 306982
Line Length
‡
: Up to 250 ft (76.2 m)
Annual Usage: 20,000 lb or more (9,072 kg)
Dispense Points: 4 or more
Typical Applications: High pressure grease to 7500 psi (517 bar)
Fire-Ball 425, 75:1
1.95 lb/min
(.88 kg/min.)
7500 psi
(517 bar)
4.25 in
(10.8 cm)
40-100 psi
(2.8-7 bar)
26 cfm @100 psi
(7 bar)
CS, Leather
1/2 in npt(f)
Slotted
3/8 in npt(f)
Line Length
‡
: Up to 500 ft (152.5 m) Dispense Points: 4 or more
Annual Usage: 15,000 lb or more (6,804 kg) Typical Applications: High pressure grease to 7500 psi (517 bar)
Manual
308777/ 306982
Fire-Ball 300, 15:1
0.7 gpm
2700 psi
(186 bar)
3 in
(7.6 cm)
40-180 psi
(2.8-12.5 bar)
17 cfm@ 100 psi
(7 bar)
CS, AL, Leather,
PTFE, Rubber
3/8 in npt(f)
1 in npt(f)
Straight
Inlet
1/4 in npt(f)
Line Length
‡
: Up to 250 ft (76.2 m)
Annual Usage: Up to 10,000 lb (4,535 kg)
Dispense Points: 1 to 2
Medium Pressure Grease to 2700 psi (186 bar)
Manual 306531
Fire-Ball 425, 10:1
3.5 gpm
1800 psi
(124 bar)
4.25 in
(10.8 cm)
40-180 psi
(2.8-12.5 bar)
13 cfm @100 psi
(7 bar)
Steel, Bass,
Aluminum, Leather,
Buna-N
1/2 in npt(f)
Slotted
Line Length
‡
: Up to 500 ft (152.4 m) Dispense Points: 4 or more
Annual Usage: 20,000 lb or more (9,072 kg) Typical Applications: High pressure grease to 1800 psi (124 bar)
Manual 309407
* Not recommended with hose reel ‡ Consult your local authorized Graco representative for line or pipe sizing
1 in npt(f)
22
L U B R I C A T I O N E Q U I P M E N T
❚
G R E A S E P U M P S
www.graco.com
Grease Pumps Quick Reference
Technical Specifi cations and Selection Chart
See NXT Ordering Information for Instruction Manuals
Output
Per Cycle
Output at
60 CPM*
Maximum
Fluid
Pressure
Motor
Size
Maximum Air Input
Pressure psi (bar)
Floor-mounted
Check-Mate, 14:1**
500cc
57.0 lb/min
(26.0 kg/min)
1400
(96.5 bar)
NXT 3400 100 (6.9)
Line Length
‡
: Up to 100 ft (30.5 m)
Annual Usage: Up to 20,000 lb. (9,072 kg)
Check-Mate, 26:1
Dispense Points: 1
Typical Applications: Small maintenance facility
500cc
57.0 lb/min
(26.0 kg/min)
2600
(179.3 bar)
NXT 6500 100 (6.9)
Line Length
‡
: Up to 250 ft (76.2 m)
Annual Usage: Up to 20,000 lb. (9,072 kg)
Dispense Points: 1 to 2 (simultaneous)
Typical Applications: Smaller continuous duty, maintenance facility
Check-Mate, 29:1
Line Length
‡
: Up to 250 ft (76.2 m)
Annual Usage: Up to 20,000 lb. (9,072 kg)
250cc
28.0 lb/min
(13.0 kg/min)
2900
(200.0 bar)
NXT 3400 100 (6.9)
Dispense Points: 4 or more
Typical Applications: Medium continuous duty, maintenance facility
Check-Mate, 55:1
250cc
28.0 lb/min
(13.0 kg/min)
5500
(379.2 bar)
NXT 6500 75 (5.2)
Line Length
‡
: Up to 250 ft (76.2 m)
Annual Usage: Up to 20,000 lb. (9,072 kg)
Check-Mate, 63:1**
Dispense Points: 1 to 2 (simultaneous)
Typical Applications: Smaller continuous duty, maintenance facility
100cc
11.4 lb/min
(5.2 kg/min)
4500
(310.3 bar)
NXT 3400 72 (5.0)
Line Length
‡
: Up to 250 ft (76.2 m)
Annual Usage: Up to 20,000 lb. (9,072 kg)
Check-Mate, 68:1**
Dispense Points: 1 to 2 (simultaneous)
Typical Applications: Smaller continuous duty, maintenance facility
200cc
22.8 lb/min
(10.4 kg/min)
5300
(356.5 bar)
NXT 6500 78 (5.4)
Line Length
‡
: Up to 500 ft (152.5 m)
Annual Usage: Up to 20,000 lb. (9,072 kg)
* Graco recommends 20 CPM or less for supply applications.
**NXT Check-Mate pump is available in fl oor stand or RAM Package.
See NXT package section of this book for more information.
Dispense Points: 1 to 2 (simultaneous)
Typical Application: Smaller continuous duty, maintenance facility
RAM-mount
www.graco.com
L U B R I C A T I O N E Q U I P M E N T
❚
G R E A S E P U M P S
23
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- - Quick Reference Guides
- 3 225, Fire-Ball 300, Fire-Ball
- 5 Oil Pump Accessories
- 10 Quick Reference Guides
- 12 Mini Fire-Ball
- 13 Fire-Ball
- 16 Fire-Ball 425, 10:1, 50:1, 75:1; Bulldog
- 21 Air-Operated Double-Diaphragm Pumps
- 22 (Stainless Steel)
- 24 Electric Dispense Systems
- 27 GTP10 and GTP12 Fuel Transfer Pumps
- 28 Lube Truck and Undercoating/Rust-Proofi ng Packages
- 30 Windshield Washer and Coolant Dispense Systems
- 31 II Pumps
- 33 Oil and Grease Dispense
- 34 Fluid Transfer
- 35 Selection Guide
- 36 LD, SD, XD, 700 and 750 Hose Reels
- 43 Reel Packages
- 44 Accessories
- 46 Multi-Station Consoles and Oil Bar
- 47 LD, SD, EM6, EM12 and In-Line Electronic Meters
- 52 Mechanical Meters
- 53 Accessories
- 54 Control and Dispense Valves
- 57 Grease Guns, Accessories and Fittings
- 60 and Accessories
- 63 Hoses, Fittings and Accessories
- 70 Tank Packages