Initial Settings
1
Set the language, time, and date after purchasing the camera before you start taking pictures.
Four-way controller
4 button
3 button
The [Language/ ] screen appears when the camera is turned on for
the first time. Perform the operations in “Setting the Display Language”
below to set the language, and in “Setting the Date and Time” (p.38) to
set the current date and time.
Language, Date, and Time can be changed later. Refer to the pages below for instructions.
• To change the language, follow the steps in “Changing the Display
Language” (
1
p.169).
• To change the date and time, follow the steps in “Changing the Date and Time” (
1
p.165).
Setting the Display Language
1
Use the four-way controller
( 2345 ) to choose the display language.
E n g l i s h
Deutsch
D a n s k
Svenska
S u o m i
P o l s k i
I t a l i a n o
Nederlands
MENU C a n c e l
Magyar
OK O K
36
2
Press the 4 button.
The Initial Setting screen appears in the selected language. If the desired settings for [Hometown] and daylight saving time appear, press the 4 button again to display the [Date Adjust] screen. Go to
“Setting the Date and Time” (p.38).
Go to Step 3 in “Setting Hometown and
DST” if the desired settings do not appear.
I n i t i a l S e t t i n g
H o m e t o w n
N e w Yo r k
E n g l i s h
DST
MENU C a n c e l OK O K
Daylight saving time
1
If you accidentally select another language and go to the next procedure, perform the following operation to set the language back.
When Another Language Has Been Inadvertently Selected
1
Press the four-way controller ( 5 ).
2
Use the four-way controller ( 2345 ) to select the language and press the 4 button.
The Initial Setting screen appears in the selected language.
When the Screen After Step 2 Appears in Another Language
1
Press the 4 button.
2
Press the 3 button.
3
Press the four-way controller ( 5 ).
4
Use the four-way controller ( 32 ) to select [Language/
].
5
Press the four-way controller ( 5 ).
The [Language/ ] screen appears.
6
Use the four-way controller ( 2345 ) to select the language.
7
Press the 4 button.
The [ W Setting] menu appears in the selected language.
The language is now switched to your desired language. To reset Hometown and the Date and Time, refer to the pages below for instructions.
• To change Hometown, follow the steps in “Setting the World Time” (p.167).
• To change the Date and Time, follow the steps in “Changing the Date and
Time” (p.165).
37
1
Setting Hometown and DST
3
Press the four-way controller ( 3 ).
The frame moves to [Hometown].
4
Press the four-way controller ( 5 ).
I n i t i a l S e t t i n g
E n g l i s h
The Hometown screen appears.
5
Use the four-way controller ( 45 ) to choose the city.
6
Press the four-way controller ( 3 ).
H o m e t o w n
N e w Yo r k
MENU C a n c e l
DST
OK O K
The frame moves to [DST] (Daylight Saving Time).
7
Use the four-way controller ( 45 ) to select O (On) or
P (Off).
8
Press the 4 button.
The Initial Setting screen appears.
9
Press the 4 button.
The Date Adjust screen appears. Next, set the date and time.
Setting the Date and Time
Set the current date and time and the display style.
1
Press the four-way controller ( 5 ).
D a t e A d j u s t
The frame moves to [mm/dd/yy].
2
Use the four-way controller ( 23 ) to choose the date and time display style.
D a t e S t y l e
D a t e
Ti m e
MENU C a n c e l
3
Press the four-way controller ( 5 ).
The frame moves to [24h].
4
Use the four-way controller ( 23 ) to select [24h] (24-hour display) or
[12h] (12-hour display).
5
Press the four-way controller ( 5 ).
The frame returns to [Date Style].
D a t e A d j u s t
D a t e S t y l e
D a t e
Ti m e
MENU C a n c e l
24h
0 1 / 0 1 / 2 0 0 8
0 : 0 0
OK O K mm dd yy 24h
0 1 / 0 1 / 2 0 0 8
0 : 0 0
OK O K
38
6
Press the four-way controller ( 3 ).
The frame moves to [Date].
D a t e A d j u s t
D a t e S t y l e
D a t e
Ti m e mm dd yy 24h
0 1 / 0 1 / 2 0 0 8
0 : 0 0
MENU C a n c e l OK O K
7
Press the four-way controller ( 5 ).
The frame moves to the month.
8
Use the four-way controller ( 23 ) to change the month.
Change the day and year in the same manner.
Next, change the time.
If you selected [12h] in Step 4, the setting
D a t e A d j u s t
D a t e S t y l e
D a t e
Ti m e
MENU C a n c e l switches between am and pm corresponding to the time.
9
Press the 4 button.
The setting is set and the camera returns to capture status.
mm dd yy 24h
0 1 / 0 1 / 2 0 0 8
0 : 0 0
OK O K
Language, Date, Time, Hometown, and DST can be changed. Refer to the pages below for instructions.
• To change the language, follow the steps in “Changing the Display
Language” (
1
p.169).
• To change the date and time, follow the steps in “Changing the Date and Time” (
1
p.165).
• To change the city or turn DST on and off, follow the steps in “Setting the World Time” (
1
p.167).
When the Initial Setting or Date Adjust screen is displayed, you can cancel the setting operation and switch to Capture mode by pressing the 3 button. In this case, the Initial Setting screen will appear next time you turn the camera on.
If you press the 4 button in Step 9, the camera clock is reset to 00 seconds. To set the exact time, press the 4 button when the time signal (on the TV, radio, etc.) reaches 00 seconds.
The video output format (NTSC/PAL) is set to the format of the city selected in
[Hometown] on the Initial Setting screen. Refer to “List of World Time Cities” (p.180)
for the video output format of each city set as the Initial Setting, and “Changing the
Video Output Format” (p.172) for changing the setting of the video output format.
1
39
