Editing and Printing Images
Editing Images
Q button
Four-way controller
4 button
MENU OK
6
Changing the Image Size and Quality (Resize)
By changing the size and quality of a selected image, you can make the file size smaller than the original. You can use this function to continue taking pictures when the SD Memory Card or built-in memory is full, by making the images smaller and overwriting the original images to make more space available.
• Movies cannot be resized.
• You cannot select a larger resolution or higher quality than that of the original image.
1
Enter the Q mode and use the four-way controller
( 45 ) to choose the image you want to resize.
2
Press the four-way controller ( 3 ).
The Playback Mode Palette appears.
3
Use the four-way controller ( 2345 ) to select n
(Resize).
4
Press the 4 button.
The screen for choosing the size and quality appears.
5
Select [Recorded Pixels] and
[Quality Level].
Recorded Pixels 7
M
Use the four-way controller ( 45 ) to choose the size and quality.
MENU OK
Use the four-way controller ( 23 ) to switch between [Recorded Pixels] and [Quality Level].
136
6
Press the 4 button.
A confirmation dialog for overwriting the image appears.
When an image is protected, the image will be saved as a new image without the confirmation dialog displayed on the screen.
7
Use the four-way controller ( 23 ) to select [Overwrite] or [Save as].
8
Press the 4 button.
O v e r w r i t e
The resized image is saved.
S a v e a s
C a n c e l
OK
6
137
Zoom/ f / y lever
Q button
Four-way controller
4 button
Green button
MENU OK
6
Cropping Images
You can delete the unwanted part of a picture and save the cropped image as a separate image.
1
Enter the Q mode and use the four-way controller
( 45 ) to choose the image you want to trim.
2
Press the four-way controller ( 3 ).
The Playback Mode Palette appears.
3
Use the four-way controller ( 2345 ) to select o
(Cropping).
4
Press the 4 button.
The cropping screen appears.
The maximum range for cropping is shown with a green frame on the screen. Cropping cannot be performed inside of this area.
5
Choose the cropping conditions.
MENU OK
The following operations move the green frame and set the area for cropping on the screen.
Zoom/ f / y lever
Changes the size of the cropped section
Four-way controller ( 2345 )
Moves the cropping position up, down, left and right
Green button Rotates the cropping frame
6
Press the 4 button.
The cropped image is saved with a new file name.
The cropped image is saved in the same quality as the original image.
The number of recorded pixels is selected automatically according to the size of the cropped section.
Movies cannot be cropped.
138
Q button
Four-way controller
4 button
MENU OK
Copying Images and Sound Files
You can copy images and sound files from the built-in memory to the SD
Memory Card and vice versa. This function can only be selected when an SD Memory Card has been inserted in the camera.
Make sure that the camera is turned off before inserting or removing the SD Memory Card.
1
Press the four-way controller ( 3 ) in Q mode.
The Playback Mode Palette appears.
2
Use the four-way controller ( 2345 ) to select p
(Image/Sound Copy).
3
Press the 4 button.
The copying method selection screen appears.
6
To Copy Files from the Built-in Memory to the SD Memory Card
All the images and sound files in the built-in memory are copied to the
SD Memory Card at once. Before copying the images, make sure that there is enough space on the SD Memory Card.
4
Use the four-way controller ( 23 ) to select [ 2}{ ].
5
Press the 4 button.
SD
All the images and sound files are copied.
OK
139
6
To Copy Files from the SD Memory Card to the Built-in Memory
Selected images and sound files from the SD Memory Card are copied to the built-in memory one at a time.
4
Use the four-way controller ( 23 ) to select [ {}2 ].
5
Press the 4 button.
6
Use the four-way controller ( 45 ) to select the file you want to copy.
7
Press the 4 button.
MENU OK
The selected image/sound file is copied.
• If sound has been recorded with the image, the sound file is copied with the image.
• When a file is copied from the SD Memory Card to the built-in memory, it is assigned a new file name.
140
Q button
Four-way controller
4 button
MENU OK
Using the Digital Filters
This mode lets you change the color tones and perform special processing on a selected image.
Digital Filters
B&W/sepia filter
Color filter
Color extraction filter
Processes the image using the selected filter. You can choose from two filters: B&W and sepia.
Processes the image using the selected color filter. You can choose from six filters: red, pink, purple, blue, green, and yellow.
Processes the image using the selected color extraction filter. You can choose from three filters: Red,Green, and Blue.
Soft filter Processes the image into a soft image with the entire image blurred.
Brightness Filter Adjusts the brightness of the image.
1
Enter the Q mode and use the four-way controller
( 45 ) to choose the image you want to edit.
2
Press the four-way controller ( 3 ).
The Playback Mode Palette appears.
3
Use the four-way controller
( 2345 ) to select D (Digital
Filter).
4
Press the 4 button.
The digital filter selection screen appears.
4 3 2 1
1 B&W/sepia filter
2 Color filter
3 Color extraction filter
4 Soft filter
5 Brightness Filter
MENU
5
OK
6
141
To Select a B&W/sepia filter or the Soft Filter
5
Use the four-way controller ( 23 ) to choose a digital filter.
You can preview the results of the filter effect.
6
Press the 4 button.
A confirmation dialog for overwriting the image appears. When an image is protected, the image will be saved as a new image without the confirmation dialog
O v e r w r i t e
S a v e a s displayed on the screen.
7
Use the four-way controller ( 23 ) to select [Overwrite] or [Save as].
8
Press the 4 button.
C a n c e l
OK
Images processed with a B&W/sepia filter or the soft filter are recorded with the same number of recorded pixels and quality level as the original image.
6
To Select a Color filter or the Color Extraction Filter
5
Use the four-way controller ( 23 ) to choose a digital filter.
6
Use the four-way controller ( 45 ) to adjust the effect.
The color extraction filter changes in the following sequence each time you press the four-way controller ( 5 ): Green, Blue, Red.
7
Press the 4 button.
A confirmation dialog for overwriting the image appears. When an image is protected, the image will be saved as a new image without the confirmation dialog
O v e r w r i t e
S a v e a s displayed on the screen.
8
Use the four-way controller ( 23 ) to select [Overwrite] or [Save as].
9
Press the 4 button.
C a n c e l
OK
Images processed with a color filter or the color extraction filter are recorded with the same number of recorded pixels and quality level as the original image.
142
To Select the Brightness Filter
5
Use the four-way controller ( 23 ) to select the digital filter you want to use.
6
Use the four-way controller ( 45 ) to adjust the effect.
For the brightness filter, the brightness increases each time you press the four-way controller ( 5 ) and decreases each time you press the four-way controller ( 4 ).
7
Press the 4 button.
MENU OK
A confirmation dialog for overwriting the image appears.
When an image is protected, the image will be saved as a new image without the confirmation dialog displayed on the screen.
8
Use the four-way controller ( 23 ) to select [Overwrite] or [Save as].
9
Press the 4 button.
The edited image is saved with the same number of recorded pixels and quality level as the original.
Movies or images taken with another camera cannot be edited using
[Digital Filter]. An error message appears if you choose this function from the Playback Mode Palette and press the 4 button.
6
143
Q button
Four-way controller
4 button
MENU OK
6
Red-eye Compensation
You can correct images where the flash has caused the subject to appear with red eyes.
1
Enter the Q mode and use the four-way controller
( 45 ) to choose the image you want to correct.
2
Press the four-way controller ( 3 ).
The Playback Mode Palette appears.
3
Use the four-way controller ( 2345 ) to select Z (Redeye Compensation).
4
Press the 4 button.
A confirmation dialog for overwriting the image appears. When an image is protected, the image will be saved as a new image without the confirmation dialog displayed on the screen.
5
Use the four-way controller ( 23 ) to select [Overwrite] or [Save as].
6
Press the 4 button.
O v e r w r i t e
S a v e a s
C a n c e l
OK
The edited image is saved with the same number of recorded pixels and quality level as the original.
• The red-eye compensation function cannot be used on movies or on images where red eyes cannot be detected on the camera. An error message appears in Step 4.
• The red-eye compensation function can only be used with still pictures taken with this camera.
144
Zoom/ f / y lever
Q button
Four-way controller
4 button
MENU OK
Adding a Frame (Frame Composite)
This function lets you add a decorative frame to still pictures. There are three frames already stored in the camera.
1
Enter the Q mode and use the four-way controller ( 45 ) to choose the image to which you want to add a frame.
2
Press the four-way controller ( 3 ).
The Playback Mode Palette appears.
3
Use the four-way controller ( 2345 ) to select Y
(Frame Composite).
4
Press the 4 button.
A 9-frame display of the frame selection screen appears.
5
Use the four-way controller
( 2345 ) to choose a frame.
OK
6
Turn the Zoom/ f / y lever towards y .
The selected frame appears in single-image display.
You can choose another frame using either of the following operations.
• Use the four-way controller ( 45 ) to
OK choose a different frame.
• Turn the Zoom/ f / y lever towards f to return to the 9-frame display of the frame selection screen, and then perform Step 5 to choose a different frame.
6
145
6
7
Press the 4 button.
The frame position and size adjustment screen appears. Use the four-way controller
( 2345 ) to adjust the position of the image, and use the Zoom/ f / y lever to make the image larger or smaller.
8
Press the 4 button.
MENU
A confirmation dialog for overwriting the image appears. When an image is protected, the image will be saved as a new image without the confirmation dialog
O v e r w r i t e
S a v e a s
C a n c e l displayed on the screen.
9
Use the four-way controller ( 23 ) to select [Overwrite] or [Save as].
10
Press the 4 button.
The edited image is saved with the recorded pixels of h .
OK
OK
The Frame Composite function cannot be used on movies or images of size i or smaller. An error message appears in Step 4.
Using a New Frame
Frames downloaded from a PENTAX website or other source can be used when adding a frame to pictures. To display the frames available in the built-in memory or the SD Memory Card, in Step 3, select Y
(Frame Composite) and press the 4 button.
• The three frames stored in the internal memory cannot be deleted.
• Up to 96 downloaded frames can be displayed. Including the three frames already stored in the internal memory, you can choose from up to 99 frames.
• Extract the downloaded frame and copy it to the FRAME folder in the Built-in memory or SD Memory Card.
• The FRAME folder is created when the built-in memory or SD
Memory Card is formatted with this camera.
146
How to display the Movie Edit menu
Q button
Four-way controller
4 button
OK MENU
Editing Movies
You can select a frame from a recorded movie to save as a still picture or divide a movie into two.
1
Enter the Q mode and use the four-way controller
( 45 ) to choose the movie you want to edit.
2
Press the four-way controller ( 3 ).
The Playback Mode Palette appears.
3
Use the four-way controller ( 2345 ) to select [
(Movie Edit).
4
Press the 4 button.
The movie edit selection screen appears.
Go to the following pages.
• Saving a Frame from a Movie as a Still
Picture
• “Dividing a Movie” (p.148)
S a v e a s S t i l l i m a g e
OK
Protected movies cannot be divided.
6
Saving a Frame from a Movie as a Still Picture
5
Select [Save as Still image] on the movie edit selection screen.
147
6
Press the 4 button.
The screen appears for selecting a frame to be saved as a still picture.
7
Use the four-way controller
( 2345 ) to choose the frame you want to save.
2 : Plays or pauses the movie
3 : Stops the movie and returns to the first frame
4 : Reverses the movie frame by frame
5 : Advances the movie frame by frame
8
Press the 4 button.
The selected frame is saved as a still picture.
11
6
Dividing a Movie
5
Select [Divide Movies] on the movie edit selection screen.
6
Press the 4 button.
The screen for choosing the dividing position appears.
7
Use the four-way controller
( 2345 ) to determine the dividing position.
MENU OK
2 : Plays or pauses the movie
3 : Stops the movie and returns to the first frame
4 : Reverses the movie frame by frame
5 : Advances the movie frame by frame
8
Press the 4 button.
A confirmation dialog appears.
9
Use the four-way controller ( 23 ) to select [Divide].
10
Press the 4 button.
D i v i d e
C a n c e l
OK
The movie is divided at the specified position, the two portions are saved as new files, and the original one is deleted.
148
