Messages
Messages such as the following may appear on the display during camera operation.
Message
Battery depleted
Memory card full
Memory card error
Card not formatted
Card locked
Compression error
No image/sound
Movie recording stopped
Deleting
Camera cannot play this image and sound
Image folder could not be created
Protected
Description
The battery is exhausted. Charge the battery using the
battery charger. (p.22)
The SD Memory Card is full and no more images can be saved.
Insert a new SD Memory Card or delete unwanted images.
(p.28, p.128)
Change the quality level or recorded pixels of recorded
images and try again. (p.136)
Shooting and playback are impossible due to a problem with the SD Memory Card. You may be able to display or copy the images on the card using a PC.
The SD Memory Card you have inserted is unformatted or has been formatted on a computer or other device and is not compatible with this camera. Format the SD Memory
Card in the camera. (p.162)
The SD Memory Card is write-protected. (p.30)
This message occurs when the camera fails to compress an image. Change the quality level or recorded pixels of the image and try shooting or saving it again.
There are no image/sound files on the SD Memory Card.
This message appears when the internal temperature of the camera has exceeded normal operating limits while recording a movie.
This message appears when deleting an image or sound file.
You are trying to play back an image or sound in a format not supported by this camera. You may be able to play it back on another brand of camera or on your computer.
The largest file number (9999) has been assigned to an image in the largest folder number (999) and no more images can be saved. Insert a new SD Memory Card or
format the card. (p.162)
The image or sound file you are trying to delete is protected.
9
189
Message
Data being recorded
Data being processed
This message appears when the camera takes more than five seconds to display an image due to image processing, or when the SD Memory Card or built-in memory is being formatted.
Displayed if the built-in memory is full when saving a file.
Built-in memory full
No image to be processed
This image/sound cannot be processed
Displayed when there are no images or sound files.
Displayed for files that cannot be processed.
No card in the camera Displayed when no SD card is inserted.
The built-in memory is not enough to copy images/sounds
Displayed when there is insufficient built-in memory to perform copying.
Cannot process correctly
Display image/sound from built-in memory
Green mode must be canceled to use this function.
Description
This message appears when you try to switch to Q mode while an image is still being recorded, or when the protect setting or DPOF setting is being changed. It disappears after the image is recorded or the setting is changed.
Displayed when Red-eye Compensation processing fails.
Displayed when the camera enters built-in memory display.
Displayed when you try to use a function not supported by the Green Mode.
9
Messages such as the following may appear on the display when using the PictBridge function.
Message
Low paper level in the printer
Description
The paper level of the printer is low.
No paper in the printer There is no paper in the printer.
Paper stuck in the printer The paper is stuck in the printer.
Low ink level in the printer The ink level of the printer is low.
No ink in the printer There is no ink in the printer.
Printer error
Data error
Connection error
Check printer
Printing now
An error message has been sent from the printer.
A data error message has been sent from the printer.
Displayed when a PictBridge connection fails.
Displayed when printing is being executed.
190
Message Description
Printing is completed.
Continue printing?
Print Canceled
Displayed when printing completes.
Displayed when printing is canceled.
No image to be processed Displayed when there are no images to print.
Wrong DPOF setting Displayed when DPOF printing cannot be performed.
9
191
