Alarm Displays. OTIS OI-315 TOCSIN3
Add to My manuals24 Pages
OTIS OI-315 TOCSIN3 personal monitor is a safety device designed to detect toxic gas in ambient air and alert you with visual, vibrating, and audible alarms. It features adjustable alarm set points, data logging, user-replaceable sensor, LCD display with LED backlight, and is water/dust proof. Wear it on your person in the field to continuously monitor for gas exposure and ensure your safety.
advertisement
Alarm Displays
Alarm Indicators
If the concentration of gas changes, the value of concentration will be indicated on the display screen in real-time. If the gas concentration exceeds the present value for the low or high alarm, the measured value of gas and or icon (respectively) will blink periodically. In addition, an LED notification, audible alarm and vibration will be triggered.
Returning to Normal Operating Mode Following a Low Alarm
To silence the audio alarm briefly while in Low Alarm, press the green power button
(the lights and vibration will continue until the reading drops below the Low Alarm limit). Once the device has been moved to a clean-air location, the alarms will stop.
To remove the alarm icon from the display screen following a Low Alarm, press the green power button. This step allows the user to confirm that the area is indeed safe.
11
advertisement
Related manuals
advertisement
Table of contents
- 2 Product Overview
- 5 Introduction
- 5 Complete System Diagram
- 5 Complete System
- 6 LCD Display Symbols
- 7 Power On
- 7 Power Off
- 8 Basic Operation
- 8 Gas Measure Mode
- 8 LCD Backlight On/Off
- 8 Viewing Date and Time
- 9 Setting Date and Time
- 10 Alarms and Indicators
- 10 Setting Alarms
- 10 Default Alarm Set Points
- 11 Alarm Displays
- 11 Alarm Indicators
- 11 Returning to Normal Operating Mode Following a Low Alarm
- 12 Returning to Normal Operating Mode Following a High Alarm
- 12 Indication of Peak Value and STEL / TWA Value
- 12 Battery Notifications
- 13 Data Logging (Alarm Data)
- 14 Fresh Air Calibration
- 15 Standard Gas Calibration
- 17 Battery Replacement
- 18 Sensor Element Replacement
- 20 User Notice
- 20 Approval Label Notes
- 21 Specifications