advertisement
Getting Started - Using Your 900 Series™
Your 900 Series™ Fishing System user interface is easy to use. A combination of keys, different views, and situation-specific, customizable menus allows you to control what you see on the color display. Refer to the following illustration, and see Key Functions, Views, and The Menu
System) for more information.
Powering Up the Control Head
Turn on your 900 Series™ control head by pressing the POWER key. The Title screen is displayed until the 900 Series™ begins operation. Your 900 Series™ will begin Normal or Simulator operation, depending on the presence or absence of a transducer.
1
2
3
4
5
6
Screen
MMC/SD Card Slot
ZOOM (+/-) Keys
POWER/LIGHT Key
INFO Key
MARK Key
1
3
9
7
5
6
12
4-WAY Cursor Control Key
MENU Key
VIEW Key
7
8
9
EXIT Key
10
View Preset Keys
11
GOTO Key
12
8
10
11
2
4
900 Series™ 967c Combo Title Screen
27
advertisement
Related manuals
advertisement
Table of contents
- 9 How the 900 Series™ Works
- 10 3D Sonar
- 10 2D Sonar
- 11 How GPS and Cartography Work
- 12 Multi-Media Card (MMC)/SD Slot
- 12 Software Updates
- 12 Accessory Bus
- 14 Gimbal Mounting the Control Head
- 19 Connecting the Control Head Power Cable to the Boat
- 20 Transom Transducer Installation
- 25 Inside the Hull Transducer Installation
- 28 Trolling Motor Transducer Installation
- 28 Trolling Motor Transducer Options
- 28 Test and Finish the Transducer Installation
- 30 Stem Mounting with an Existing 1" - 14 Thread Stem
- 31 Access Under Mounting Location
- 31 No Access Under Mounting Location
- 32 Finish Routing the Cable and Check GPS Receiver Operation
- 33 Temperature Probe Accessory Installation
- 35 Powering Up the Control Head
- 36 What’s on the 3D Sonar Display
- 37 What's on the 2D Sonar Display
- 38 Real Time Sonar (RTS®) Window
- 38 Bottom Presentation
- 39 POWER/LIGHT Key
- 40 VIEW Key
- 40 MENU Key
- 41 4-WAY Cursor Control Key
- 41 View Preset Keys
- 41 EXIT Key
- 42 INFO Key
- 42 MARK Key
- 42 GOTO Key
- 43 ZOOM (+/-) Keys
- 43 Views and Readouts
- 44 3D/2D Combo View
- 45 2D Sonar View
- 46 2D Zoom View
- 47 6-Beam Sonar View
- 48 Snapshot and Recording View
- 52 Bird’s Eye View
- 53 Chart/Bird’s Eye Combo View
- 54 Chart/Chart Combo View
- 55 Chart View
- 56 Chart/3D Combo View
- 57 Chart/2D Combo View
- 58 Chart Orientation
- 60 Waypoints, Routes and Tracks
- 61 Save, Edit, or Delete a Waypoint
- 62 Navigate to a Waypoint or Position
- 62 Add a Waypoint Target or Trolling Grid
- 63 Save, Edit or Delete a Route
- 64 Save or Clear a Current Track
- 64 Edit, Delete or Hide Saved Tracks
- 65 Man Overboard (MOB) Navigation
- 68 Normal Operation
- 68 Simulator
- 68 System Status
- 69 Self Test
- 69 Accessory Test
- 70 GPS Diagnostic View
- 71 Active Side
- 72 Split Position
- 72 Sensitivity
- 73 Lower Range
- 74 Chart Speed
- 75 2D/3D Priority
- 76 Active Side
- 76 Split Position
- 77 3D Bottom Zoom
- 77 3D Lower Range
- 78 3D History
- 78 Reset 3D View
- 78 2D/3D Priority
- 80 Active Side
- 80 Split Position
- 81 Save Current Track
- 81 Clear Current Track
- 89 2D Sonar Colors
- 89 3D Bottom Style
- 90 3D Frame Style
- 90 2D Beam Select
- 90 Fish ID
- 91 Fish ID Sensitivity
- 91 Fish ID 3D Reference
- 92 Real Time Sonar (RTS®) Window
- 92 Bottom View
- 93 83 kHz Sensitivity
- 96 Color Bar
- 97 Current Track
- 97 Saved Tracks
- 98 Waypoints
- 98 Routes
- 99 Chart Orientation
- 99 North Reference
- 99 Trolling Grid Rotation
- 100 Trackpoint Interval
- 101 Track Color Range
- 101 Course Projection Line
- 102 Continuous Navigation Mode
- 103 Chart Detail Level
- 103 Map Borders
- 104 Lat/Lon Grid
- 104 Spot Soundings
- 104 Navaids on Bird's Eye View
- 104 Shaded Depth
- 107 Depth Alarm
- 107 Fish ID Alarm
- 107 Low Battery Alarm
- 108 Temp Alarm
- 109 Off Course Alarm
- 109 Arrival Alarm
- 110 Drift Alarm
- 110 Alarm Tone
- 111 Units - Depth
- 113 Restore Defaults