advertisement
Views
ZOOM (+/-) Keys
Press the - or + ZOOM keys while in any of the Navigation
Views or the Sonar Zoom View to change the scale of the view to appear closer or farther away.
The views available on your 900 Series™ are:
Chart
View
Chart/Chart
Combo View
Chart/Bird’s Eye
Combo View
Birds’s Eye
Combo View
GPS Diagnostic
View
Accessory
Test View
Chart/3d
Combo View
Chart/2D
Combo View
2D Sonar
View
2D Zoom
View
3D/2D
Combo View
6-Beam
Sonar View
Snapshot and
Recording View
Self Test
View
35
• 2D Sonar View
• 2D Zoom View
• 3D/2D Combo View
• 6-Beam Sonar View
• Snapshot and Recording View
• Self Test View
• Accessory Test View
• GPS Diagnostic View
• Bird’s Eye View
• Chart/Bird’s Eye Combo View
• Chart/Chart Combo View
• Chart View
• Chart/3D Combo View
• Chart/2D Combo View
3D/2D Combo View is the default view. When the VIEW key is pressed, the display cycles through the available views. When the EXIT key is pressed, the display cycles through the available views in reverse order. Any view can be hidden or displayed as part of the view rotation using the Views
Menu tab.
NOTE: When you change any menu settings that affect the sonar, the view will update immediately (i.e. you don’t have to exit the menu to apply the change to the screen).
Views and Readouts
All views have an Information Bar on the left side of the screen, consisting of readouts that are stacked vertically, and that change from view to view.
You can customize the information displayed in individual readouts on many views, including suppressing a particular readout so that nothing is displayed; the ability to customize readouts depends on the view and whether you are navigating (see Setup Menu Tab, Select Readouts for more information).
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 9 How the 900 Series™ Works
- 10 3D Sonar
- 10 2D Sonar
- 11 How GPS and Cartography Work
- 12 Multi-Media Card (MMC)/SD Slot
- 12 Software Updates
- 12 Accessory Bus
- 14 Gimbal Mounting the Control Head
- 19 Connecting the Control Head Power Cable to the Boat
- 20 Transom Transducer Installation
- 25 Inside the Hull Transducer Installation
- 28 Trolling Motor Transducer Installation
- 28 Trolling Motor Transducer Options
- 28 Test and Finish the Transducer Installation
- 30 Stem Mounting with an Existing 1" - 14 Thread Stem
- 31 Access Under Mounting Location
- 31 No Access Under Mounting Location
- 32 Finish Routing the Cable and Check GPS Receiver Operation
- 33 Temperature Probe Accessory Installation
- 35 Powering Up the Control Head
- 36 What’s on the 3D Sonar Display
- 37 What's on the 2D Sonar Display
- 38 Real Time Sonar (RTS®) Window
- 38 Bottom Presentation
- 39 POWER/LIGHT Key
- 40 VIEW Key
- 40 MENU Key
- 41 4-WAY Cursor Control Key
- 41 View Preset Keys
- 41 EXIT Key
- 42 INFO Key
- 42 MARK Key
- 42 GOTO Key
- 43 ZOOM (+/-) Keys
- 43 Views and Readouts
- 44 3D/2D Combo View
- 45 2D Sonar View
- 46 2D Zoom View
- 47 6-Beam Sonar View
- 48 Snapshot and Recording View
- 52 Bird’s Eye View
- 53 Chart/Bird’s Eye Combo View
- 54 Chart/Chart Combo View
- 55 Chart View
- 56 Chart/3D Combo View
- 57 Chart/2D Combo View
- 58 Chart Orientation
- 60 Waypoints, Routes and Tracks
- 61 Save, Edit, or Delete a Waypoint
- 62 Navigate to a Waypoint or Position
- 62 Add a Waypoint Target or Trolling Grid
- 63 Save, Edit or Delete a Route
- 64 Save or Clear a Current Track
- 64 Edit, Delete or Hide Saved Tracks
- 65 Man Overboard (MOB) Navigation
- 68 Normal Operation
- 68 Simulator
- 68 System Status
- 69 Self Test
- 69 Accessory Test
- 70 GPS Diagnostic View
- 71 Active Side
- 72 Split Position
- 72 Sensitivity
- 73 Lower Range
- 74 Chart Speed
- 75 2D/3D Priority
- 76 Active Side
- 76 Split Position
- 77 3D Bottom Zoom
- 77 3D Lower Range
- 78 3D History
- 78 Reset 3D View
- 78 2D/3D Priority
- 80 Active Side
- 80 Split Position
- 81 Save Current Track
- 81 Clear Current Track
- 89 2D Sonar Colors
- 89 3D Bottom Style
- 90 3D Frame Style
- 90 2D Beam Select
- 90 Fish ID
- 91 Fish ID Sensitivity
- 91 Fish ID 3D Reference
- 92 Real Time Sonar (RTS®) Window
- 92 Bottom View
- 93 83 kHz Sensitivity
- 96 Color Bar
- 97 Current Track
- 97 Saved Tracks
- 98 Waypoints
- 98 Routes
- 99 Chart Orientation
- 99 North Reference
- 99 Trolling Grid Rotation
- 100 Trackpoint Interval
- 101 Track Color Range
- 101 Course Projection Line
- 102 Continuous Navigation Mode
- 103 Chart Detail Level
- 103 Map Borders
- 104 Lat/Lon Grid
- 104 Spot Soundings
- 104 Navaids on Bird's Eye View
- 104 Shaded Depth
- 107 Depth Alarm
- 107 Fish ID Alarm
- 107 Low Battery Alarm
- 108 Temp Alarm
- 109 Off Course Alarm
- 109 Arrival Alarm
- 110 Drift Alarm
- 110 Alarm Tone
- 111 Units - Depth
- 113 Restore Defaults