advertisement
2D/3D Priority
2D/3D Priority allows you to change the way the 6 beams on the transducer are used in order to prioritize and customize the 2D and 3D display of information.
Select 2D Only when you wish to look at 2D views and want the 2D information to be updated quickly (if you are looking at the 3D/2D Combo
View, the 3D side of the screen will be empty and the message "3D Disabled" will be displayed.)
Select Equal when you are switching between 2D only and 3D/2D views, and you want the 2D information to be updated more slowly while maintaining the 3D data display.
Select 3D when you want to see the most detailed 3D information;
2D information will be updated most slowly with this choice.
To change the 2D/3D Priority:
1. Highlight 2D/3D Priority on the 2D Sonar X-Press™ menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the
2D/3D Priority. (2D Only, Equal, 3D, Default = 3D)
Cancel Navigation
(only when Navigating)
Cancel Navigation discards the current route and exits Navigation Mode.
This menu choice will only appear when you are currently navigating a route.
This will not delete a previously-saved route.
To Cancel Navigation:
1. Highlight Cancel Navigation on the 2D Sonar X-Press™ menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate canceling navigation.
3. The Confirm dialog box will appear. To cancel navigation, press the
RIGHT Cursor key once more. To avoid canceling navigation, press the LEFT Cursor key.
67
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 9 How the 900 Series™ Works
- 10 3D Sonar
- 10 2D Sonar
- 11 How GPS and Cartography Work
- 12 Multi-Media Card (MMC)/SD Slot
- 12 Software Updates
- 12 Accessory Bus
- 14 Gimbal Mounting the Control Head
- 19 Connecting the Control Head Power Cable to the Boat
- 20 Transom Transducer Installation
- 25 Inside the Hull Transducer Installation
- 28 Trolling Motor Transducer Installation
- 28 Trolling Motor Transducer Options
- 28 Test and Finish the Transducer Installation
- 30 Stem Mounting with an Existing 1" - 14 Thread Stem
- 31 Access Under Mounting Location
- 31 No Access Under Mounting Location
- 32 Finish Routing the Cable and Check GPS Receiver Operation
- 33 Temperature Probe Accessory Installation
- 35 Powering Up the Control Head
- 36 What’s on the 3D Sonar Display
- 37 What's on the 2D Sonar Display
- 38 Real Time Sonar (RTS®) Window
- 38 Bottom Presentation
- 39 POWER/LIGHT Key
- 40 VIEW Key
- 40 MENU Key
- 41 4-WAY Cursor Control Key
- 41 View Preset Keys
- 41 EXIT Key
- 42 INFO Key
- 42 MARK Key
- 42 GOTO Key
- 43 ZOOM (+/-) Keys
- 43 Views and Readouts
- 44 3D/2D Combo View
- 45 2D Sonar View
- 46 2D Zoom View
- 47 6-Beam Sonar View
- 48 Snapshot and Recording View
- 52 Bird’s Eye View
- 53 Chart/Bird’s Eye Combo View
- 54 Chart/Chart Combo View
- 55 Chart View
- 56 Chart/3D Combo View
- 57 Chart/2D Combo View
- 58 Chart Orientation
- 60 Waypoints, Routes and Tracks
- 61 Save, Edit, or Delete a Waypoint
- 62 Navigate to a Waypoint or Position
- 62 Add a Waypoint Target or Trolling Grid
- 63 Save, Edit or Delete a Route
- 64 Save or Clear a Current Track
- 64 Edit, Delete or Hide Saved Tracks
- 65 Man Overboard (MOB) Navigation
- 68 Normal Operation
- 68 Simulator
- 68 System Status
- 69 Self Test
- 69 Accessory Test
- 70 GPS Diagnostic View
- 71 Active Side
- 72 Split Position
- 72 Sensitivity
- 73 Lower Range
- 74 Chart Speed
- 75 2D/3D Priority
- 76 Active Side
- 76 Split Position
- 77 3D Bottom Zoom
- 77 3D Lower Range
- 78 3D History
- 78 Reset 3D View
- 78 2D/3D Priority
- 80 Active Side
- 80 Split Position
- 81 Save Current Track
- 81 Clear Current Track
- 89 2D Sonar Colors
- 89 3D Bottom Style
- 90 3D Frame Style
- 90 2D Beam Select
- 90 Fish ID
- 91 Fish ID Sensitivity
- 91 Fish ID 3D Reference
- 92 Real Time Sonar (RTS®) Window
- 92 Bottom View
- 93 83 kHz Sensitivity
- 96 Color Bar
- 97 Current Track
- 97 Saved Tracks
- 98 Waypoints
- 98 Routes
- 99 Chart Orientation
- 99 North Reference
- 99 Trolling Grid Rotation
- 100 Trackpoint Interval
- 101 Track Color Range
- 101 Course Projection Line
- 102 Continuous Navigation Mode
- 103 Chart Detail Level
- 103 Map Borders
- 104 Lat/Lon Grid
- 104 Spot Soundings
- 104 Navaids on Bird's Eye View
- 104 Shaded Depth
- 107 Depth Alarm
- 107 Fish ID Alarm
- 107 Low Battery Alarm
- 108 Temp Alarm
- 109 Off Course Alarm
- 109 Arrival Alarm
- 110 Drift Alarm
- 110 Alarm Tone
- 111 Units - Depth
- 113 Restore Defaults