Touch Panel. Jenn-Air JMC2127WS, JMC2430, Microwave Oven JMC2127, Microwave Oven JMW2430, Microwave Oven JMW2427, Microwave Oven JMW2327, Microwave Oven JMC2130, Microwave Oven JMW2330, Microwave Oven JMC2430

Touch Panel

The touch panel houses the control menu and function controls.

The touch pads are very sensitive, and require only a light touch to activate.

Display

For more information about the individual controls, see their respective sections in this manual.

When the oven(s) is in use (active mode), the display shows the oven temperature, heat source(s) and timer, if set.

Welcome Guide

After approximately 2 minutes of inactivity, the display will go into standby (sleep) mode, and the backlight of the display will dim.

When the oven is in operation, the display will remain active.

During programming, the display shows menus and the appropriate selections for the respective cooking function.

This appears on your display the first time the microwave is powered up. The Welcome Guide allows you to setup your new microwave.

After every selection, a double beep will sound.

1. Select your language by pressing the quickset pad next to

English or French.

2. Select the temperature units by pressing the quickset pad next to Fahrenheit or Celsius.

3. Select the clock units by pressing the quickset pad nexto to

AM/PM or 24 Hour (Military Time).

4. Choose Yes or No to have the Daylight-Savings-Time automatically updated.

5. Enter current time (--:--) using the number keypad and choose AM or PM by pressing the quickset pad next to them.

6. Enter current date (MM/DD/YYYY) using the number keypad and press the quickset pad next to the Next option.

7. Select a screen appearance to match your microwave. Press the quickset pad next to Stainless, Black, White or Oiled-

Bronze.

8. Review your settings and press the quickset pad next to Save option. A message will show: “You have selected a new theme. The oven will reset momentarily. Please wait....” It will take 1 minute to restart with the new settings set.

9. See the “Setup Menu” section for more detailed information.

Display Screen

The LCD display screen is used to make menu selections, adjust settings and input commands.

Back Start More

A. Title/description region

B. Menu and selection/settings input region

C. Command input region

A

B

C

Menu selections and input adjustments are made in the center portion of the screen, and the command inputs (Back, More,

Start, etc.) are made using the bottom buttons. Screen titles and descriptions are displayed in the top portion of the screen. A light to medium pressure touch of the fingertip will activate the menu selection.

8