Panasonic Workio DP-7000 Grayscale Copier

Daily Care

Increasing the Toner Level

5-2: Adjusting Copy Density

(Lighter/Darker) for information on how to adjust the copy density.

If you find that copies made are too light, you can increase the copy density by adjusting the toner level. This feature can be used besides the Lighter/

Darker feature to adjust the copy density. However, normally there is no need to use this feature because the toner quantity of the developer unit is automatically adjusted by the machine.

Procedure

Press Settings/Meter Check.

8

The screen on the right is when the

Auditron feature is enabled. See

Chapter 9 Using the Auditron

Feature for details.

Select Toner Level Adjustment.

Select Start.

198

8-3 Increasing the Toner Level

Daily Care

The following screen will be displayed for 40 seconds and the toner level will be adjusted during this time.

No copy job can be done during this time.

After the toner level is adjusted, the default screen re-appears.

8-3 Increasing the Toner Level 199

8