advertisement
▼
Scroll to page 2
of
89
HP ProLiant BL465c Gen8 Server Blade
User Guide
Abstract
This document is for the person who installs, administers, and troubleshoots servers and storage systems. HP assumes you are qualified in the servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels.
Part Number: 661814-001
June 2012
Edition: 1
advertisement
Related manuals
advertisement
Table of contents
- 1 HP ProLiant BL465c Gen8 Server Blade User Guide
- 1 Abstract
- 2 Notice
- 3 Contents
- 6 Component identification
- 6 Front panel components
- 7 Front panel LEDs and buttons
- 8 Drive LED definitions
- 8 System board components
- 9 System maintenance switch
- 10 Mezzanine connector definitions
- 10 DIMM slot locations
- 11 Tool location
- 11 HP c-Class Blade SUV Cable
- 12 Operations
- 12 Power up the server blade
- 12 Power down the server blade
- 13 Remove the server blade
- 14 Remove the access panel
- 14 Install the access panel
- 14 Remove the DIMM baffle
- 15 Install the DIMM baffle
- 16 Remove the front panel/drive cage assembly
- 17 Install the front panel/drive cage assembly
- 18 Remove the SAS controller
- 19 Install the SAS controller
- 20 Remove all drives
- 22 Setup
- 22 Overview
- 22 Installing an HP BladeSystem c-Class enclosure
- 22 Installing server blade options
- 22 Installing interconnect modules
- 23 Interconnect bay numbering and device mapping
- 24 Connecting to the network
- 25 Installing a server blade
- 26 Completing the configuration
- 27 Hardware options installation
- 27 Introduction
- 27 Drive option
- 30 Processor option
- 34 Memory options
- 35 HP SmartMemory
- 36 Memory subsystem architecture
- 36 Single-, dual-, and quad-rank DIMMs
- 37 DIMM identification
- 37 Memory configurations
- 38 Advanced ECC memory configuration
- 38 Online Spare memory configuration
- 38 General DIMM slot population guidelines
- 39 Advanced ECC population guidelines
- 39 Online spare population
- 39 Population order
- 39 Installing DIMMs
- 40 Mezzanine card option
- 42 Capacitor pack option
- 44 HP Trusted Platform Module option
- 45 Installing the Trusted Platform Module board
- 46 Retaining the recovery key/password
- 47 Enabling the Trusted Platform Module
- 48 Cabling
- 48 Cabling resources
- 48 Capacitor pack cabling
- 49 Drive cabling
- 49 Using the HP c-Class Blade SUV Cable
- 49 Connecting locally to a server blade with video and USB devices
- 49 Accessing a server blade with local KVM
- 50 Accessing local media devices
- 52 Software and configuration utilities
- 52 Server mode
- 52 Server QuickSpecs
- 52 HP iLO Management Engine
- 52 HP iLO
- 53 Active Health System
- 54 Integrated Management Log
- 54 Intelligent Provisioning
- 55 HP Insight Diagnostics
- 55 HP Insight Diagnostics survey functionality
- 55 Erase Utility
- 56 HP Insight Remote Support software
- 56 Scripting Toolkit
- 57 HP Service Pack for ProLiant
- 57 HP Smart Update Manager
- 57 HP ROM-Based Setup Utility
- 58 Using RBSU
- 58 Auto-configuration process
- 59 Boot options
- 59 Configuring AMP modes
- 59 Re-entering the server serial number and product ID
- 60 Utilities and features
- 60 Array Configuration Utility
- 61 Option ROM Configuration for Arrays
- 61 ROMPaq utility
- 61 Automatic Server Recovery
- 62 USB support
- 62 Redundant ROM support
- 62 Safety and security benefits
- 62 Keeping the system current
- 62 Drivers
- 63 Software and firmware
- 63 Version control
- 63 HP Operating Systems and Virtualization Software Support for ProLiant Servers
- 63 Change control and proactive notification
- 64 Troubleshooting
- 64 Troubleshooting resources
- 65 Battery replacement
- 66 Regulatory compliance notices
- 66 Regulatory compliance identification numbers
- 66 Federal Communications Commission notice
- 66 FCC rating label
- 66 FCC Notice, Class A Equipment
- 66 FCC Notice, Class B Equipment
- 67 Declaration of conformity for products marked with the FCC logo, United States only
- 67 Modifications
- 67 Cables
- 67 Canadian notice (Avis Canadien)
- 68 European Union regulatory notice
- 68 Disposal of waste equipment by users in private households in the European Union
- 69 Japanese notice
- 69 BSMI notice
- 69 Korean notice
- 70 Chinese notice
- 70 Vietnam compliance marking notice
- 70 Ukraine notice
- 70 Laser compliance
- 71 Battery replacement notice
- 71 Taiwan battery recycling notice
- 71 Acoustics statement for Germany (Geräuschemission)
- 73 Electrostatic discharge
- 73 Preventing electrostatic discharge
- 73 Grounding methods to prevent electrostatic discharge
- 74 Specifications
- 74 Environmental specifications
- 74 Server blade specifications
- 75 Support and other resources
- 75 Before you contact HP
- 75 HP contact information
- 75 Customer Self Repair
- 83 Acronyms and abbreviations
- 85 Documentation feedback
- 86 Index