advertisement
Electrostatic discharge
Preventing electrostatic discharge
To prevent damaging the system, be aware of the precautions you need to follow when setting up the system or handling parts. A discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the device.
To prevent electrostatic damage:
•
Avoid hand contact by transporting and storing products in static-safe containers.
•
Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations.
•
Place parts on a grounded surface before removing them from their containers.
•
Avoid touching pins, leads, or circuitry.
•
Always be properly grounded when touching a static-sensitive component or assembly.
Grounding methods to prevent electrostatic discharge
Several methods are used for grounding. Use one or more of the following methods when handling or installing electrostatic-sensitive parts:
•
Use a wrist strap connected by a ground cord to a grounded workstation or computer chassis. Wrist straps are flexible straps with a minimum of 1 megohm ±10 percent resistance in the ground cords. To provide proper ground, wear the strap snug against the skin.
•
Use heel straps, toe straps, or boot straps at standing workstations. Wear the straps on both feet when standing on conductive floors or dissipating floor mats.
•
Use conductive field service tools.
•
Use a portable field service kit with a folding static-dissipating work mat.
If you do not have any of the suggested equipment for proper grounding, have an authorized reseller install the part.
For more information on static electricity or assistance with product installation, contact an authorized reseller.
Electrostatic discharge 73
advertisement
Related manuals
advertisement
Table of contents
- 1 HP ProLiant BL465c Gen8 Server Blade User Guide
- 1 Abstract
- 2 Notice
- 3 Contents
- 6 Component identification
- 6 Front panel components
- 7 Front panel LEDs and buttons
- 8 Drive LED definitions
- 8 System board components
- 9 System maintenance switch
- 10 Mezzanine connector definitions
- 10 DIMM slot locations
- 11 Tool location
- 11 HP c-Class Blade SUV Cable
- 12 Operations
- 12 Power up the server blade
- 12 Power down the server blade
- 13 Remove the server blade
- 14 Remove the access panel
- 14 Install the access panel
- 14 Remove the DIMM baffle
- 15 Install the DIMM baffle
- 16 Remove the front panel/drive cage assembly
- 17 Install the front panel/drive cage assembly
- 18 Remove the SAS controller
- 19 Install the SAS controller
- 20 Remove all drives
- 22 Setup
- 22 Overview
- 22 Installing an HP BladeSystem c-Class enclosure
- 22 Installing server blade options
- 22 Installing interconnect modules
- 23 Interconnect bay numbering and device mapping
- 24 Connecting to the network
- 25 Installing a server blade
- 26 Completing the configuration
- 27 Hardware options installation
- 27 Introduction
- 27 Drive option
- 30 Processor option
- 34 Memory options
- 35 HP SmartMemory
- 36 Memory subsystem architecture
- 36 Single-, dual-, and quad-rank DIMMs
- 37 DIMM identification
- 37 Memory configurations
- 38 Advanced ECC memory configuration
- 38 Online Spare memory configuration
- 38 General DIMM slot population guidelines
- 39 Advanced ECC population guidelines
- 39 Online spare population
- 39 Population order
- 39 Installing DIMMs
- 40 Mezzanine card option
- 42 Capacitor pack option
- 44 HP Trusted Platform Module option
- 45 Installing the Trusted Platform Module board
- 46 Retaining the recovery key/password
- 47 Enabling the Trusted Platform Module
- 48 Cabling
- 48 Cabling resources
- 48 Capacitor pack cabling
- 49 Drive cabling
- 49 Using the HP c-Class Blade SUV Cable
- 49 Connecting locally to a server blade with video and USB devices
- 49 Accessing a server blade with local KVM
- 50 Accessing local media devices
- 52 Software and configuration utilities
- 52 Server mode
- 52 Server QuickSpecs
- 52 HP iLO Management Engine
- 52 HP iLO
- 53 Active Health System
- 54 Integrated Management Log
- 54 Intelligent Provisioning
- 55 HP Insight Diagnostics
- 55 HP Insight Diagnostics survey functionality
- 55 Erase Utility
- 56 HP Insight Remote Support software
- 56 Scripting Toolkit
- 57 HP Service Pack for ProLiant
- 57 HP Smart Update Manager
- 57 HP ROM-Based Setup Utility
- 58 Using RBSU
- 58 Auto-configuration process
- 59 Boot options
- 59 Configuring AMP modes
- 59 Re-entering the server serial number and product ID
- 60 Utilities and features
- 60 Array Configuration Utility
- 61 Option ROM Configuration for Arrays
- 61 ROMPaq utility
- 61 Automatic Server Recovery
- 62 USB support
- 62 Redundant ROM support
- 62 Safety and security benefits
- 62 Keeping the system current
- 62 Drivers
- 63 Software and firmware
- 63 Version control
- 63 HP Operating Systems and Virtualization Software Support for ProLiant Servers
- 63 Change control and proactive notification
- 64 Troubleshooting
- 64 Troubleshooting resources
- 65 Battery replacement
- 66 Regulatory compliance notices
- 66 Regulatory compliance identification numbers
- 66 Federal Communications Commission notice
- 66 FCC rating label
- 66 FCC Notice, Class A Equipment
- 66 FCC Notice, Class B Equipment
- 67 Declaration of conformity for products marked with the FCC logo, United States only
- 67 Modifications
- 67 Cables
- 67 Canadian notice (Avis Canadien)
- 68 European Union regulatory notice
- 68 Disposal of waste equipment by users in private households in the European Union
- 69 Japanese notice
- 69 BSMI notice
- 69 Korean notice
- 70 Chinese notice
- 70 Vietnam compliance marking notice
- 70 Ukraine notice
- 70 Laser compliance
- 71 Battery replacement notice
- 71 Taiwan battery recycling notice
- 71 Acoustics statement for Germany (Geräuschemission)
- 73 Electrostatic discharge
- 73 Preventing electrostatic discharge
- 73 Grounding methods to prevent electrostatic discharge
- 74 Specifications
- 74 Environmental specifications
- 74 Server blade specifications
- 75 Support and other resources
- 75 Before you contact HP
- 75 HP contact information
- 75 Customer Self Repair
- 83 Acronyms and abbreviations
- 85 Documentation feedback
- 86 Index