15.4.6 Configuring DDNS settings. Lorex LH030 ECO BLACKBOX3 SERIES, LH03081TC4

15 Using the Main Menu

If you select "Enable", and want to use your own email server:

1. Configure the following:

• SSL: Select ON/OFF to enable/disable Secure Socket Layer protocol.

• SMTP Port: Enter the port used by your SMTP server.

• SMTP Server: Enter your SMTP Server address.

• Sender Email: Enter the sender email address. This can be any address of your choice.

• Sender Password: Enter your email server’s password.

• Receiver Email: Enter the recipient’s email address.

• Interval: Enter the interval the DVR waits before sending a new email notification.

2. Click Apply to save your settings.

3. Right-click until you have exited all menus. You will be prompted to restart.

15.4.6

Configuring DDNS settings

Lorex DDNS is available as an optional connectivity option. Please see 25 DDNS Setup

(Advanced), page 142 for details.

The primary connectivity option uses Lorex Stratus Connectivity to connect to your system over the Internet without requiring port forwarding or DDNS registration. For details, see

16 Connecting to Your DVR Over the Internet on PC or Mac, page 69.

To configure DDNS settings:

1. Visit http://www.lorexddns.net and register for a DDNS account.

2. Click the DDNS tab.

3. Configure the following:

• DDNS: Select Enable.

• Server: Select LOREXDDNS (default).

• Domain Name: Enter the Domain name/URL Request you received in the email after registering for DDNS.

• User Name: Enter your DDNS User Name.

• Password: Enter your DDNS Device password.

4. Click Apply to save your settings.

Note

Please allow 10~15 minutes for the DDNS servers to update with your new DDNS address before attempting to connect.

#LX400008; r. 2.0/12067/12067; en-US

55