advertisement
Connections
Step 3: Connecting TV
Option 1 Option 2
1
4
2
* IMPORTANT!
– You only need to make one video connection from the following options, depending on the capabilities of your TV.
– Connect the DVD system directly to the TV.
Using Composite Video jack
1
Use the supplied composite video cable
(yellow) to connect the DVD system’s
VIDEO OUT jack to the video input jack (or labelled as A/V In, Video In,
CVBS, Composite or Baseband) on the
TV.
2
To hear the TV channels through this
DVD system, use the supplied audio cables (white / red) to connect AUDIO
IN-TV) jacks to the corresponding
AUDIO OUT jacks on the TV.
3
Before starting operation, press
TV on the remote to select “
TV” in order to activate the input source.
4
2 1
* IMPORTANT!
– The progressive scan video quality is only possible when using Y Pb Pr, and a progressive scan TV is required.
Using Component Video jacks
(Y Pb Pr)
1
Use a component video cables (red/blue/ green - not supplied) to connect the
DVD syst em’s Y Pb Pr jacks to the corresponding Component video input jacks (or labelled as Y Pb Pr or YU V) on the TV.
2
To hear the TV channels through this
DVD system, use the supplied audio cables (white/red) to connect AUDIO IN-
TV jacks to the corresponding AUDIO
OUT jacks on the TV.
3
Before starting operation, press TV on the remote to select “
TV” in order to activate the input source.
4
If y ou are using a Progressive Scan TV (TV must indicate Progressive Scan or
ProScan capability), to activate TV
Progressive Scan, please refer to your
TV user manual. For DVD receiver
Progressive Scan function through
SYSTEM MENU, See page 25.
Helpful Hint:
– If your TV does not support Progressive
Scan, you will not be able to view the picture.
Press and hold OPEN/CLOSE key, and press ‘1’ to deactivate progressive scan.
8
advertisement